Question: How can I discover my processor? Answer: Here are two methods to discover Netlinx controllers if the IP address.......

Question: What storage formats are supported on NX controllers? Answer: Storage devices formatted with FAT32 file system only, are supported.......

Question: Can you change the ICSP port on an NX controller? Answer: No, the ICSP port is fixed at 1319.......

Question: Why did NX Series Controllers temporarily stop supporting RS-422 and RS-485? Answer: Update 6-12-2023 NX processors now support RS-422 and RS-485. The.......

Question: Are any AMX products effected by CVE-2023-38408? Answer: A vulnerability was identified in relation to the use of OpenSSH within.......

Question:    Can I leave NetLinx devices at their dynamic device addresses after plugging them on the bus? ​ Answer:.......

Question:    How do you turn off/disable security on an NX controller? Answer: Sometimes it is necessary to disable the.......

Question:    Can audit logging to the internal SD card be disabled? Answer: Starting with NX-series firmware 1.6.205 and 1.8.203.......

Summary: NX Controllers memory leak re: TLS 1.3 Pre build firmware – v1.8.200 / v1.8.201 Escalation Ticket: TSC-00427462-ESC001 JIRA Ticket:.......

Overview: If HTTP/HTTPS/Telnet/SSH/FTP has been disabled using the web console and you need to re-enable from telnet or SSH there.......

Question: How to get the MAC address of a NetLinx master, using GET_UNIQUE_ID() and print to touch panel.  Answer: This.......

Problem: Modules are not loading after updating controller firmware to 1.8.x.  In the boot log when the module attempts to.......

Question: Does my NX Controller support RS422/485? Answer: Due to component shortages we had a short run of NX controllers.......

Notes for configuring LDAP/S when using SSH on an NX master: You cannot use the IP address as part of.......

Brand: AMX Models: NX-1200 NX-2200 NX-3200 NX-4200,  Enova DVX-x2xx,DVX-x2xx-4K Enova DGX 800/1600/3200/6400 FG #:  FG2106-01, FG2106-02, FG2106-03, FG2106-04, FG1906-07, FG1906-09,.......

Brand: AMX Models: NX-1200 Overview: This article will cover the replacement of the microSD card in a NX-1200 processor. What.......

Brands: AMX Models: Product Name: Master Controllers NX-1200 NX-2200 NX-3200 NX-4200  Enova DVX-x2xx Enova DGX 8/16/32/64 Massio Control Pads MCP-10x.......

Brand: AMX  Models: Netlinx Overview: As a preface, it is important to understand that the Source file “SRC” is not.......

Brand: AMX Models: NI- Series NX-Series Question:    How do I set up the I/O ports to accept a voltage.......

​Setting up LDAPS on a Master: Introduction There are several things to take into consideration when setting up a secure.......

Brand: AMX  Models: NX-1200 NX-2200 NX-3200 NX-4200 Question:    Does the NX Series have an internal battery? Answer: ​The NX-1200,.......

Brand: AMX Models: Netlinx NX Series Overview: NetLinx proves a useful and flexible environment to accomplish a variety of automation.......

Brand: AMX Models: NX-Series Controllers ​AMX NX Control Processor Default Info The default login and IP information for NX processors.......

Brand: AMX Models: Netlinx Overview: This sample Netlinx program is an example of automating the reboot of the master.  It.......

​​The NX Series masters and their specifications. Transcript ***Insert Script Here***....

​​Various uses of the USB ports on th​​e NX Series controllers.​  ....

​​An overview of the features for the NX Series controllers.​​  ....

​​Various diagnostic methods for the Seri​​al and IR ports on the NX Series controllers.​   ....

​​​The network capabilities for the NX series ​​controllers.  ....

​​​How to locate and use the IPv6 address on the NX series NetLinx Integrated Controllers.​  ....

​Using the ID Button to change IP modes and factor​​y reset the unit for the NX Series controllers.​   ....

​​​How to implement SSH public key authentications with the SSH Clien​​t_Open function.  ....

802.1x Security for the NX Series  ....

​​​​​​What roles are and how to set them up.   ....

​​​​How to setup users who nee​d to access the master, how a user can find out what permissions they have,.......

​​​​This video covers the security e​nhancements that are related to LDAP in the NX web interface.  ....