Strings Received on N2600 Serial Port 50004 Connection are not Reported Back to Controlling Device
Escalation Article
Written by Richard Gregory
Updated at September 15th, 2026
Table of Contents
Brand:
- AMX
Affected Products:
- All N2600 Devices
Summary:
Strings received on N2600 serial port 50004 connection are not reported back to the controlling device. This means no unsolicited feedback is ever reported back to the controller from the serial connection.
Troubleshooting:
Issue resolved in firmware v1.8.8 or later.
If the procedure above did not resolve your issue, please contact HARMAN Support for next steps.