Brand:

• AMX

Models:

• SVSI Encoders and Decoders
   

Overview:

This article covers creating log files for SVSI encoders and decoders.

Proceedure:

Login to the GUI of the encoder/decoder, either through a web browser or N-Able.  The process is the same for encoders and decoders.

Once logged in you will click on the Logs button in the header.

Click on the “Start Debug Log” button at the bottom of the page.  Once running the Log will accumulate data for 48 hours and will survive a reboot.  

Once a failure is observed you will then stop the log. This is done by clicking the “End Debug Log” button.

Log files will not appear right away.  Give it a few seconds and click the “Refresh page” button.

The “Download Debug Log” link will appear when the files has been created and ready for download. Clicking the Download Debug Log link will result in the download of the log file named, “DebugLog.bin”.   This log will download the file to the browser default location.  Usually found in the “Downloads” section located in file explorer.  If you are creating multiple log file, please rename them with a friendly name, such as location and device.

Log files should be sent to HProTechSupportUSA@harman.com or directly to the tech you have been working with for decryption.