JBL Powered Speakers Quick Reset Guide
Table of Contents
EON ONE Compact
Press and hold both the DUCKING and PHANTOM buttons for 5 seconds. All LEDs will flash to confirm the process.
IRX
Press and hold the Bluetooth button until all lights turn off and the Power light flashes (~10 seconds).
Note: After resetting, the EQ Preset will be set to “FLAT."
EON 600
While powering up the speaker, holding EQ+ and Boot buttons will return the speaker to factory default settings.
When the reset begins all LEDs will blink on the speaker control panel. This procedure can be utilized as a backdoor to restoring reliable behavior.
The speaker will not be part of the mobile application's network group any longer, so the device has to be re-added.
PRX 800
- Turn the speaker power off.
- Press and hold the POLARITY or SYSTEM EQ (NORM/BOOST or MAIN/MONITOR) button then turn the speaker power back on.
Keep the button held for 5 seconds or until the LED above the POLARITY or SYSTEM EQ (NORM/BOOST or MAIN/MONITOR) button flashes briefly. - All DSP and network settings have now been reset back to the factory default.
Table of Contents