​Question:

How do I setup ViSi Remote with my Soundcraft Si console?

Answer:

     1.      Start with the console powered off.

     2.      Connect a wireless router via CAT5 from the non-networking (aux) ports to the HiQnet port on the back of the console.

     3.      Power up the console and select SYSTEM from the main display.   

     4.      Make sure the IP Address & Subnet Mask fields are populated (Not all 0's)

   ​5.      Select HIQNET from the main display.​

     6.      Make sure that Access Control is enabled.

     7.      On your iPad, go to settings, scroll down to ViSi Remote, select it, & write down the iPad's HiQnet Address.

     8.      One the console, under HIQNET scroll down to Device 1 & set its access to ALL.

     9.      With Device 1 highlighted select the ADDRESS ASSIGN button & enter in your iPad's HiQnet address (must be different than the console's HiQnet Address).   

     10.   On the iPad open the ViSi Remote App, console should automatically come up as an option select your console.

     11.   If you have issues, force close the app on iPad or just restart iPad.

For further assistance, please contact technical support