Brand:

• JBL

Models:

• SRX906LA
• SRX910LA
• SRX912M
• SRX915M
• SRX922
• SRX915S
• SRX918S
• SRX918SF
• SRX928S

Overview:

This article walks through updating the firmware on JBL SRX900 Series loudspeakers using the NetSetter utility within JBL Performance.  It covers discovering compatible devices, applying firmware updates, and verifying a successful installation

Connecting in Performance:

• First, power on all network devices and connected speakers.  If this is your first time connecting to the speakers inside JBL Performance, follow our Initial Setup walkthrough here.

Updating the Firmware:

• Once the speakers are discovered in Performance, you will receive a notification banner if there are Firmware updates available for your speakers.

• Navigate to Netsetter, select the speaker, then select the new Firmware version.  Click ‘Apply Changes’ to begin the update process.

• Once the update is underway, you will see it go through 3 stages: transferring, updating, and rebooting.  Expect the speaker to disappear from NetSetter during the Reboot phase.

• Following the reboot, the speaker should reappear inside NetSetter, listing the new Firmware version.

If the update fails or shows an error message, first Revert the Firmware then re-attempt the update procedure outlined above.  

If you require further assistance, please visit HARMAN Professional Support to identify the appropriate local support team for your region.