​EON ONE Compact

Press and hold both the DUCKING and PHANTOM buttons for 5 seconds. All LEDs will flash to confirm the process.

IRX

Press and hold the Bluetooth button until all lights turn off and the Power light flashes (~10 seconds). 

Note: After resetting, the EQ Preset will be set to “FLAT."

​

EON 600

​While powering up the speaker, holding EQ+ and Boot buttons will return the speaker to factory default settings. 

When the reset begins all LEDs will blink on the speaker control panel. This procedure can be utilized as a backdoor to restoring reliable behavior. 

The speaker will not be part of the mobile application's network group any longer, so the device has to be re-added.

PRX 800

1. Turn the speaker power off. 

2. Press and hold the POLARITY or SYSTEM EQ (NORM/BOOST or MAIN/MONITOR) button then turn the speaker power back on. 

Keep the button held for 5 seconds or until the LED above the POLARITY or SYSTEM EQ (NORM/BOOST or MAIN/MONITOR) button flashes briefly. 

3. All DSP and network settings have now been reset back to the factory default.

​