DGX 4K60 DXLINK Fiber
Frequently Asked Questions
Table of Contents
Brand:
Models:
Can the Multi-Mode SFP+ Optical Transceivers in the DXLink 4K60 fiber units be replaced with Single-Mode SFP+ Optical Transceivers?
What is the Max distance available with a Single-mode SFP+ module?
What Single-mode SFP+ modules are available for use with the 4k60 DXLink Fiber products?
Brand:
- AMX
Models:
- DGX
- DGX-I-DXFP-4K60
- DGX-O-DXFP-4K60
- DXFP-TX-4K60
- DXFP-RX-4K60
Can the Multi-Mode SFP+ Optical Transceivers in the DXLink 4K60 fiber units be replaced with Single-Mode SFP+ Optical Transceivers?
- Yes, the product was designed and tested to support the use of Single-Mode SFP+ Optical Transceivers.
- The DGX manual currently states on pg38 "^ User must procure Single Mode SFP+ modules and install them in place of the provided Multimode SFP+ Modules".
What is the Max distance available with a Single-mode SFP+ module?
- The distance for fiber transmission is dependent on the transceivers used and the bandwidth required.
- The 4K60 DXlink Multimode specs are published based on testing with the shipping MM SFP+ modules for a 10Gbps signal.
- Similarly a customer sourced module would be dependent on the new SingleMode SFP+ module’s performance/specifications.
- Testing of a few Single-Mode SFP+ modules was conducted and validated to a distance of 10km.
What Single-mode SFP+ modules are available for use with the 4k60 DXLink Fiber products?
- Harman does not sell any specific module so customers may procure their own Single Mode SFP+ modules. The supported distances will be specifed by that module based on the 10Gpbs signal bandwidth. We tested the 4k60 Fiber products with a couple of available Single-mode SFP+ modules from the previous 2k DXlink Fiber products:
- Option 1
- Mfr: Broadcom / Avago / Foxconn
- Mfr P/N: AFCT-739SMZ
- Harman P/N: AMX25-0019
- Option 2
- Mfr: Luma Optics
- Mfr P/N: SFP-10G-LR-LU
- Harman P/N: FGVSFP-LR
- Option 1
Table of Contents
Brand:
Models:
Can the Multi-Mode SFP+ Optical Transceivers in the DXLink 4K60 fiber units be replaced with Single-Mode SFP+ Optical Transceivers?
What is the Max distance available with a Single-mode SFP+ module?
What Single-mode SFP+ modules are available for use with the 4k60 DXLink Fiber products?