Brands:

• AMX

Models:

Product Name:

• N2315 Video Encoder

SKU / FG #:

• NMX-ENC-N2315-WP-BL 
• NMX-ENC-N2315-WP-WH

Downloads:

Version: v01.01.32
Release Date: 3/10/2023
Download Link:

N2315_Updater_2023-03-09-v01.01.32.zip

Previous Release:

N2315_Updater_2021-10-22-v01.01.26.zip

Information:

New in this release:

• Add new command to allow HDCP input source change
• New command "setSettings:VIDIN_HDCP:" - options enable/disable
  • example to enable HDCP "setSettings:VIDIN_HDCP:enable"
  • example to disable HDCP "setSettings:VIDIN_HDCP:disable"
• After command sent, a hotplug event will occur, if still needed, hotplug source

Revision History:

Version 01.01.29

• Updated LLDP formatting on webpage

Version 01.01.28

• System Hardware Driver Updates
• Added Vlan and PoE status to LLDP settings page

Version 01.01.26

• HDR support added feature support for input audio for hostplay/localplay
   (Input Audio for LocalPlay needs to be enabled on the Decoder)
• fixed netlinx native command usage
• added support for secure netlinx connection
• fixed N2300 encoder reporting resolution to SVSI software
• updated TLS to TLS1.2 only

Version 01.01.25

• Fix dscp values used on webpage. New values allowed from webpage are listed below:
   {0, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 46, 48, 56}
• Remove support for TLS 1.0 and 1.1
• Fix webpage security issue with POST
• Remove support for TLS 1.0 and 1.1
• Make more DHCP attempts during unit boot up
• Add new command to create dhcp timing extended
•  New command "setSettings:dhcpAgain:300", after 300 seconds after the unit assigns itself an auto IP, the DHCP process would start again. User can modify the 300 to value they need. Lower limit is 60 seconds, to allow linkLocal to work properly. To disable the setting, "setSettings:dhcpAgain:0"
• Improve the "Unsolicited Status" feature

Version 01.00.11

• Improve KVM connection recovery on reboot.
• Change audio stream ttl to default to 64
• Implement KVM retry
• Add optional encoder reboot on audio input failure

Version 01.00.05

• Fix issue with uploading odd host/local play image sizes
• Fix issue with debug log startup
• Fix issue with KVM reconnecting on encoder restart
• Improved button feedback on webpages
• Fixed issue with streaming to N1000/N2000 decoders
• Improved audio dropout issue when streaming to an N4321
• Fixed audio multicast address calculation
• Don't issue NAct plug events on bootup

Version 01.00.03

• Fix multicast addressing for non-address interleaved mode
• Quicker detection of VGA video
• Fix issue with odd hostplay image sizes
• Provide HDCP state on the web page
• Fix audio stream incompatibility with other NSeries products
• Improve KVM restart on powerup
• Add more user indications for button presses on the web page
• Fix issue with HDMI input not playing on certain sources

Version 01.00.02

• Note: not compatible with 00.xx.xx N23xx releases
• Improved switch performance

Version 00.04.08

• Add 1920x1200 to EDID (requires reload default EDID)
• Latest netlinx support and add netlinx version to the webpage

Version 00.04.06

• Fix audio 7.1 issue
• Fix issue with audio channel count change crashing encoder.
• Fix issue with log overflowing on debug start
• Add support for DNS