MAC Aura PXL - Control Latency and Delayed Dimmer Response With Art-Net Control
Escalation Article
Written by Andras Schober
Updated at November 13th, 2026
Brand:
- Martin
Affected Products:
- MAC Aura PXL
Summary:
When operating in Art-Net mode, fixtures may exhibit noticeable control latency, particularly during hard-cut dimmer chase sequences. In some instances, individual fixtures appear to temporarily ignore dimmer updates and respond with a delay exceeding one second. This behavior is isolated to Art-Net control, identical system setups operate normally when switched to standard DMX and has been reproduced across various lighting consoles, network switches, and cabling configurations.
Troubleshooting:
To resolve the latency issue, update the fixture to MAC Aura PXL Firmware Version 1.2.0 or later. This firmware release extends the Art-Net timeout threshold from 1 second to 5 seconds to prevent packet drops and delayed responses, while also introducing general stability enhancements.
If the procedure above did not resolve your issue, please contact HARMAN Support for next steps.