I-Tech 4x3500 - Front Panel Dark

Technical Support Guide

Table of Contents

Brand: Models: Overview: Procedure: You can activate this via front panel: If using System Architect 3.10 or higher, this option in found by:

Brand:

Crown

Models:

I-Tech 4x3500

Overview:

Front panel goes dark leaving only the green LED around the power switch on. If the screen or any button is pressed the front panel comes back up but after a short time it goes out again, but audio is passing.

Procedure:

The IT4x3500HD has an option for the front panel to go into a “Blackout" mode which will turn ALL LED's plus the display off just leaving the green AC line indicator around the switch on. All LED's and the display will come back up once the screen, buttons or knob is pressed or turned. The amplifier will return to the off state after a short period if nothing is being adjusted via the front panel. Audio passing through the amplifier will not be displayed via front panel while in “Blackout" mode.

You can activate this via front panel:

General Properties Menu>Screen Configuration.

This mode option will be seen next on the display.

If using System Architect 3.10 or higher, this option in found by:

Double click on the AMP INFO button.