How to Disable/Enable SVSI Encoder/Decoder Webpage
Frequently Asked Questions
Table of Contents
Brand:
- AMX/SVSI
Models:
AMX/SVSI Encoders and Decoders that support webpage enable/disable:
FGN3132-SA (NMX-ENC-N3132)
FGN3132-CD (NMX-ENC-N3132-C)
FGN3232-SA (NMX-DEC-N3232)
FGN3232-CD (NMX-DEC-N3232-C)
FGN2412A-SA (NMX-ENC-2412A)
FGN2412A-CD (NMX-ENC-2412A-C)
FGN2422A-SA (NMX-ENC-2422A)
FGN2424A-SA (NMX-ENC-2424A)
AMX-N26E001 (NMX-ENC-N2612S)
AMX-N26E001C (NMX-ENC-N2612S-C)
AMX-N26D001 (NMX-DEC-N2622S)
AMX-N33E001 (NMX-ENC-N3312D)
AMX-N33E001C (NMX-ENC-N3312D-C)
AMX-N33D001 (NMX-DEC-N3322D)
AMX-N26E013 (NMX-ENC-N2615D-WP)
AMX-N26E013-EK (NMX-ENC-N2615D-WP-EK)
AMX-N26D013 (NMX-DEC-N2625D-WP)
AMX-N26D013-EK (NMX-DEC-N2625D-WP-EK)
AMX-N26E011 (NMX-ENC-N2615-WP)
AMX-N26E011-EK (NMX-ENC-N2615-WP-EK)
AMX-N26D012 (NMX-DEC-N2625-WP)
AMX-N26D012-EK (NMX-DEC-N2625-WP-EK)
Question:
How to Disable/Enable SVSI encoder/decoder webpage?
Answer:
N3000/N2400 Series
I use Packet Sender for SSL - requires CR \r
https://packetsender.com/
Can use any TCP client that supports SSL.
- Send these commands to encoder or decoder on port 50101 or 50102 over SSL. Change password to the correct password if changed from default.
password\rwebPageEnable\r
password\rwebPageDisable\rFor N3000/N2400 Series, N-able will give the following message for unit with disabled webpage after double clicking unit:
N2600/N3300 Series
I use Packet Sender for SSL - requires CR \r
https://packetsender.com/
Can use any TCP client that supports SSL.
- Send this command to encoder or decoder on port 50101 or 50102 over SSL. Change password to the correct password if changed from default.
password\rwebPageDisable\rN2600/N3300 only the Disable command will work. Once disabled, users will need to factory restore unit to enable the webpage.
Can factory restore by sending API command setSettings:factoryRestore:factoryRestore to port 50001 or 50002
Or by holding down the ID button on unit until Status led goes out (approx. 30 secs).
N1000/N2000/N2300 Series
Not Supported. No webpage disable/enable available for these series.
Additional Information:
- One good security measure on SVSI products - is to disable the webpage when it's not in use. So PHP doesn't have to be sitting on the network always available for security scans.
Table of Contents