DGX 100 series MCPU Update
Software / Firmware Update
Table of Contents
Brands:
- AMX
Models:
- FG1061-08 DGX800-ENC Enova DGX 800 Enclosure
- FG1061-16 DGX1600-ENC Enova DGX 1600 Enclosure
- FG1061-32 DGX3200-ENC Enova DGX 3200 Enclosure
- FG1061-64 DGX6400-ENC Enova DGX 6400 Enclosure
Downloads:
Enova DGX 100 series firmware must be v3.8.25 or later. If an earlier version is loaded please update to the latest DGX kit using it's directions first.
See Prerequisites below.
Version: 3.8.5.5
Release Date: 3/11/2026
DGXMCPU_FW_simple_v3_8_5_5.zip
Information:
- This simple kit only updates the DGX MCPU and takes under 5 minutes to complete.
Prerequisites:
- Enova DGX 100 series firmware must be v3.8.25 or later. If an earlier version is loaded please update to the latest DGX kit using its directions first.
Click Here for DGX Switcher and Controller Update (Opens in New Window)
Known Issues:
Revision History:
- 3.8.5.5
- Fixed random reboot issue of DGX MCPU causing 4K60 DXLink devices to not configure properly or show up in the WebGUI, resulting in no video on the 4K60 DXLink RXs.
- 3.8.5.4
- Added support for new DXLink 4K60 DWP TX (requires NX v1.8.171 or later to see these in the WebGUI)
Verify the Update:
- In Netlinx Studio, refresh the online tree and click the plus sign next to 05002 - AMX Enova DGX
- MCPU Application will show 3.8.5.4 if the DGX needs to be updated
- MCPU Application will show 3.8.5.5 if the DGX has been updated
- Example below shows a unit needing the update
Table of Contents