Brand:

• AMX
• BSS Audio

Models:

• AVX Architect

Overview:

This article will focus on the VIRTUAL view of AVX Architect and examine the Logic Single Pulse Trigger.  

To see a video of this article, click HERE.

Logic Single Pulse Trigger:

The Single Pulse Trigger pulses its output high in response to its input going high and remains high for a predefined period of time.

The Single Pulse Trigger can be found in the VIRTUAL LIBRARY under Processing in the Logic section.

The Single Pulse Trigger has no control panel, and all settings are configured under OPTIONS in the PROPERTIES pane. 

Off Time is the time before the output turns high when the input is detected, measured in steps of 100 ms. 

On Time is the time that the output remains on, also in steps of 100ms. 

TYPE defines the behavior of the Single Pulse Trigger. 

 The default Type is Ignore Input During Pulse.  

This means that the logic object behaves as configured, regardless of any changes to the input during the set period for the pulse.  If the Single Pulse is triggered, toggling the source does not interrupt the counter on the active Single Pulse. 

Restart Pulse on Low to High restarts the pulse period whenever the input is taken high again. Each time the source is on, the output of the Single Pulse re-triggers. 

Cancel Pulse on High to Low immediately sets the output to low when the input signal goes low. When the input is turned low while the Single Pulse output is active high, the output also goes low.