AVX Architect - VIRTUAL View: Logic Counter Trigger
Table of Contents
Brand:
- AMX
- BSS Audio
Models:
- AVX Architect
Overview:
This article continues the exploration of the VIRTUAL view of AVX Architect and examines the Counter Trigger.
To see a video of this article, click HERE.
Counter Trigger:
The Counter Trigger object is located in the VIRTUAL view under Logic in the Processing section.
The first connection on the Logic Trigger is the Input.
The second connection on the Counter Trigger is the Rest.
The Counter Trigger object is used to create conditional actions within the program. The output of the Counter Trigger changes to the high or ON state once the number of low-to-high transitions at the input matches the count value specified in the OPTIONS section of the PROPERTIES pane.
If the count value is set to 5, and a Logic Pulse object is fed to the Counter Trigger input, the output will go high once the input detects five low-to-high cycles.
The output remains high until the reset input is turned ON.
The output of the Counter Trigger then goes low and remains low regardless of the input value until the reset input changes back to the OFF state.
Table of Contents