Brands:

• AMX
• BSS Audio

Models:

• AVX Architect

Overview:

This article will walk through device matching in AVX Architect. Matching devices is the process of associating the devices that are on your network to the devices that are in your AVX Architect design files.

To see a video of this article, click HERE.

Procedure:

This example has a Soundweb OMNI DSP that is named DSP1, an AVX Control instance for Windows that is named PC, and one more AVX Control instance running on iOS that is named iPad.

These devices show that they are Unmatched in the top left of each object.

Enable networking using the button in the top right of the window.

These devices are not properly matched, that is why their statuses did not change when we enabled networking. The names of the actual devices on the network need to be changed to match our Project.

Open AVX Manager. This can be done from inside AVX Architect by accessing the hamburger menu in the top left corner.

All three of the devices should showing in AVX Manager. If your devices aren't shown here refer to the article on network setup and troubleshooting.

Here is the Omni 256p Processor, the Apple i Pad running AVX Control on i OS, and this computer running an instance of AVX Control.

In order to match, the device names displayed here must match what has been set in the AVX Architect project file.

Rename the 256p to DSP1.

Once enter is pressed, a notification that the configuration change has been deployed to the device will be displayed.

After a short amount of time, the list will update to reflect the new name.

Rename the other devices. i Pad for the i Pad, and PC for our computer.

Open AVX Architect and notice that the objects have been updated. They now show a matched status in the top bar, which is now yellow, and they also display the device IP address in the top right of the object.

Now that the devices are matched, the Project may be deployed to the system.