​​​​​​​​​​​​Loading SVSI configuration file to a Cisco Catalyst Switch​

How to load a SVSI switch configuration file to a Cisco Catalyst switch

Using the CLI, by either a serial cable or telnet/ssh:

Copy configuration file to usb drive​

Insert drive in to switch.

You can list the contents of the usb drive by following the example above in the screen shot.  dir usbflash0:/

You should see your configuration file you placed on the drive.

Copy usbflash0:/"svsi_configuration_file.txt"    startup-config

Reload   (when the switch reboots all the parameters set in the configuration will take place)​