iEQ31-M: Surface Corrosion on Hardware & Reversed Internal Cable Connections
Table of Contents
Brand:
- dbx
Affected Products:
- dbx iEQ31-M Dual 31-Band Graphic Equalizer
- Material / Model Number: DBXIEQ31-M
Summary:
- Certain units out of the box may exhibit surface corrosion/rusting on black oxide screws/nuts or reversed internal fader ribbon cable connections affecting Channel 1 and Channel 2 control assignment.
Troubleshooting:
-
Workaround: If a unit experiences reversed fader response (Channel 1 adjusting Channel 2 or vice versa), the internal front panel fader ribbon cable connection must be re-oriented. For units with corroded external hardware, unit replacement or hardware replacement is recommended
- Verification: Perform a visual inspection of external screws and nuts. Open the top cover to verify that the front panel fader board ribbon cable is connected to the corresponding channel header on the main board in the correct orientation.
Table of Contents