Using Fixtures as sACN‑to‑DMX Nodes
Frequently Asked Questions
Written by Andras Schober
Updated at August 5th, 2026
Table of Contents
Brand:
- Martin
Models:
- Current Martin fixtures
Do any Martin fixtures support sACN input and DMX pass‑through for controlling additional fixtures?
Currently, Martin fixtures cannot be used as sACN nodes. This means the control signal type must stay the same for all fixtures in the chain.
If sACN is sent to the first fixture, the same sACN signal must continue to all other fixtures. It is not possible to change from sACN to DMX using a fixture.