Anytime Help Center

G5 MD-MT Touchpanel Hotfix Firmware

Rating
Build Notes
-------------------------------------------------------------------------------
All ModeroX G5 Panels

FG #: FG5968-35, FG5968-36,FG5968-37, FG5968-41, FG5968-42, FG5968-43,
      FG5968-47, FG5968-48, FG5968-49, FG5968-53, FG5968-54, FG5968-55,
      FG5968-55W, FG5968-56, FG5968-57, FG5968-77, FG5968-78,FG5968-79,
      FG5968-80, FG5968-81, FG5969-35, FG5969-47, FG5969-49BL,
      FG5969-53, FG5969-55BL,


Firmware Version: 1.8.50
Build Date: October 1st, 2021

Device Id:  Modero X G5               Modero G5
            ----------------------    ---------------------------
            0x0196  MXT-2001-PAN      0x0202  MT-2002
            0x0197  MXD-2001-PAN-P
            0x0198  MXD-2001-PAN-L
            0x0199  MXT-1901-PAN
            0x019A  MXD-1901-PAN-P
            0x019B  MXD-1901-PAN-L
            0x019C  MXT-1001          0x0205  MT-1002
            0x019D  MXD-1001-P
            0x019E  MXD-1001-L        0x0206  MD-1002
            0x019F  MXT-701           0x0207  MT-702
            0x01A0  MXD-701-P
            0x01A1  MXD-701-L         0x0208  MD-702
            0x01D6  MXR-1001

Prerequisites: None


-------------------------------------------------------------------------------
Changes in This Release
-------------------------------------------------------------------------------
    * HPSD-21798 (remove outdated security certicates)
-------------------------------------------------------------------------------
New Send Commands in This Release
-------------------------------------------------------------------------------
    * None.


-------------------------------------------------------------------------------
Migrating from G4 to G5
-------------------------------------------------------------------------------
    The newest Modero X touch panels are based on G5, the latest operating 
    system from AMX.  Please review the programmer’s primer regarding G4 to G5 
    differences, located at http://www.amx.com/products/TPDesign5.asp. G4 touch 
    panel files must be converted to G5-compatible files before use with G5 
    touch panels. Use the G4 Utility tool to convert panel pages from G4 to G5.  
    Refer to the Configuration and Programming Guide for Modero X Series G5 
    Touch Panels for information regarding NetLinx code modifications required 
    to support G5 panels.


-------------------------------------------------------------------------------
Known Issues/Requests
-------------------------------------------------------------------------------
    * AMXCF-2062 Tetris-G5 Tetris Panel cannot Open File with File Size Big Than 90MB

    * AMXCF-2063 Tetris- some 7 inch display will exhibit jitter in "AMX" logo at the begining of bootup





-------------------------------------------------------------------------------
Changes
-------------------------------------------------------------------------------

***********************************************
******************1.8.49***********************
***********************************************
    * HPSD-23301 (Zoom app updates, per Zoom requirements)
    * HPSD-22849 (update for default firefox browser to 68.11.0)
    * HPSD-21798 (remove outdated security certicates)
    * HPSD-21568 (Added TLSv1.2 to default calendar usage)
    * HPSD-21747 (change some webpage wording)


***********************************************
******************1.8.45***********************
***********************************************
    * Required for Zoom Rooms Controller 5.7.3

***********************************************
******************1.8.36***********************
***********************************************
* Add ability to monitor the lifecycle of external app
      - CUSTOM_EVENT [dvTP, 1, 1701]
        - custom.text = application's package name (ex: org.firefox.mozilla)
        - custom.flag
          3 = app paused/stopped
          4 = app resumed/started
    * Extend VNC server timeout capability to 24 hours (1440 minutes)
    * Add ability to specify zero (0) for VNC for indefinite timeout
***********************************************
******************1.8.25***********************
***********************************************
    * (Right Text justification)
    * (Online/offline generation)
    * (Device info reports 0.0.0.0)
    * (Low SIP volume in calls)
    * (added Kill app prior to opening)
    * (added ^TOP-3 command)
    
    * Fix inability to set static IP when not on a network with DHCP or in 
      a secure network
    * Block NTP requests when time is set to sync with a NetLinx master

 
***********************************************
******************1.8.23***********************
***********************************************
    * Fix inability to set static IP when not on a network with DHCP or in 
      a secure network
    * Block NTP requests when time is set to sync with a NetLinx master

***********************************************
******************1.8.16***********************
***********************************************
    * Fix the issue AMXCF-2072(Language switching operation will cause screen popup "Unfortunately, Settings has stopped").
    * Fix the issue AMXCF-2074(Cannot add account on 10 inch Tetris Panel).
    * Fix the issue AMXCF-2075(No offline/online event when load new .TPD5 file into panel).

-------------------------------------------------------------------------------
New Send Commands in This Release
-------------------------------------------------------------------------------
    ^APP-0,0,1280,800,0,us.zoom.zrc,kill,boolean,true
    -- the "kill" parameter will ensure previous zoom meetings will be properly
    closed prior to starting a new meeting

 

 
-------------------------------------------------------------------------------
Migrating from G4 to G5
-------------------------------------------------------------------------------
    The newest Modero X touch panels are based on G5, the latest operating 
    system from AMX.  Please review the programmer’s primer regarding G4 to G5 
    differences, located at http://www.amx.com/products/TPDesign5.asp. G4 touch 
    panel files must be converted to G5-compatible files before use with G5 
    touch panels. Use the G4 Utility tool to convert panel pages from G4 to G5.  
    Refer to the Configuration and Programming Guide for Modero X Series G5 
    Touch Panels for information regarding NetLinx code modifications required 
    to support G5 panels.



 ​



Last modified at 10/13/2021 5:25 PM by PRO Knowledge Base

Downloads:

Product

Product ID / Product Name:  

Topic: Firmware

Related Articles

Top