VARIA Firmware Bar Graph Remains Operable After Using the ^ENA Command.
Escalation Article
Written by Richard Gregory
Updated at July 28th, 2026
Table of Contents
Brand:
- AMX
Affected Products:
- 0x0220 | VARIA-SL50
- 0x0222 | VARIA-SL80
- 0x0221 | VARIA-80, VARIA-80N
- 0x0223 | VARIA-100, VARIA-100N
- 0x0224 | VARIA-150, VARIA-150N
Summary:
Incorrect behavior of ^ENA bar graph control where after command is issued the bargraph should be disabled however this did not happen on VARIA firmware v2.13.24 / v2.13.25.
Troubleshooting:
Issue resolved in latest varia firmware.
If the procedure above did not resolve your issue, please contact HARMAN Service for next steps.
Related Videos
Table of Contents