Brand:

• Soundcraft

Models:

• Si Expression 1
• Si Expression 2
• Si Expression 3
• Si Performer 1
• Si Performer 2
• Si Performer 3
• Si Impact

Summary:

This article explains how to remove and install the microSD card used in the Si Series consoles. The procedure applies to the slide-lock (hinged cover) microSD card holder used on the console's main board (Yotta board).

Procedure:

1. Locate the microSD Card Holder

The microSD card is installed in a hinged, slide-lock card holder on the console's main board. 

2. Unlock the Card Holder

Slide the metal cover toward the centre of the PCB until it releases.

Once released, the cover will lift slightly.

3. Open the Card Holder

Carefully lift the metal cover to expose the microSD card.

4. Remove the microSD Card

Remove the microSD card from the holder.

5. Insert the New microSD Card

Place the replacement microSD card into the holder.

Ensure that the card is installed in the correct orientation. The white outline printed on the PCB indicates the correct position of the card.

6. Close and Lock the Card Holder

Fold the metal cover back over the card. Press the cover down gently and slide it toward the edge of the PCB until it clicks into the locked position.

MicroSD Implementation in Si Expression and Si Performer Consoles:

Earlier versions of the Si Expression and Si Performer consoles used standard-size SD cards. Support for microSD cards was introducedwith the following Yotta board revisions.

• Si Expression - 5028600-04
• Si Performer - 5022910-03

The current Yotta board revision used in Si Performer consoles is 5022910-04.