Download:

MU-XXXX_FW_v1.4.118

Prerequisites: 

MUSE Automator 1.3.17
VSCode Plug-in 1.5.13

Programming Information:

Install .SWU file thru MUSE web interface or via USB drive

Revision History:

• 1.4.118
  • Resolved: Python cache error where reboot of MUSE generated invalid references to command initiators exhibiting as failed send_command actions to AMX Touch Panels
• 1.4.110
  • Resolved: Further improvements to HiQnet Contrio device discovery
• 1.4.105
  • Resolved: Improved HiQnet Contrio device discovery
• 1.4.103
  • Resolved: HiQnet and HControl device subscription loss when disconnecting Automator from MUSE
• 1.4.101
  • Resolved: HiQnet issue querying parameter values with active “watch”/subscription
  • Resolved: Incorrect failed login attempt reporting
  • Resolved: Alert messages stack up and never time out
• 1.4.87
  • Added support for Scopes for devices & scripts
  • Moved System>>Devices and System>>Programs web pages content to new System>>Scopes page
  • Auth Manager security enhancements required for JITC certification
  • HiQnet Protocol Driver improvements
  • Node-RED Web Access option re-enabled on the Security page
  • This allows access to Node-RED on MUSE at [ip]:1880/red
  • This allows access to Dashboard 2.0 support at [ip]:1880/dashboard when using the Dashboard 2.0 palette for a MUSE-hosted HTML5 UI
  • Web page rendered in dark mode for consistent branding with other HARMAN Pro product interfaces & software
• 1.3.51
  • Fixed HiQnet device parameter subscription/resubscription, regardless of device boot order or script start order
• 1.3.39
  • System does not work if MUSE is booted before HiQnet devices
• 1.3.34
  • Fix Duet command execution and module/reinitialize
  • Disable FIPS by default. Requires reset to factory config if 1.3.32 already installed
• 1.2.69
  • Added passBackEvent support to Duet Driver
  • Added dynamic component support to Duet Driver
• 1.2.65
  • Python Upgrade to version 3.10
  • Added MUSE Controller-to-Controller support
  • Added Scripts as devices support
  • Added LDAP Support
  • Added Auth Session Service
  • Added Python PIP installation through requirements.txt
  • Added Platform Service
  • Added I/O Manager Support for CE-COM2 devices
  • Added ICSLAN DNS lookup support
  • Added Security Banner Support
  • Added NetLinx Device Client driver

Known Issues:

• 802.1x configuration using TLS or TTLS fails

Other:

• USB drives support FAT32 file system

Download:

Muse Automator 1.3.17

Prerequisites:

• MU-XXXX Firmware 1.4.87 or higher
• VSCode Plug-in 1.5.14

System Requirements:

Software Dependencies:

• The following dependencies must be installed prior to installing MUSE Automator (see user guide).
  Automator has been tested with varying versions, but the following versions are recommended:
  • NodeJS v20.11.1+
  • NPM v10.2.4+
  • GIT v2.43.0+

Fixes in this release:

• Resolved: System does not work if MUSE is booted before HiQnet devices

Known Issues:

• There is a view syncing issue in the Push/Pull Tray where the Push/Pull Tray might not accurately reflect the true status of the system. To get the view to sync properly, simply click on the Push/Pull button a second time after pushing, pulling, starting, stopping, or deleting a project.
• There is a Controller Node view syncing issue where the Controller may show disconnected on the workspace even though it is connected. Opening the node and then pressing Connect button again may resolve this sync issue.
• Custom and string events may not trigger correctly on AMX Varia panels if they are offline when a MUSE controller has rebooted. To work around this, reboot the controller while the panels are online.
• A project cannot be deleted unless another project is running in the Push/Pull Tray
• Stopping a locally running project will cause disconnection from the remote MUSE controller
• You may sometimes experience issues when using certain third-party nodes after you've pushed a project to the controller. Check NodeJS version compatibility for the third-party nodes.

Download:

MUSE Extension for VS Code v1.5.13

Prerequisites:

MU-XXXX Firmware 1.4.87 or higher

System Requirements:

• Visual Studio Code

Software Dependencies:

• Visual Studio Code

Fixes in this release:

• MUSE Automation Controller (MU-xxxx) firmware required: 1.4.87
• Updates to accommodate new MUSE firmware

Known Issues: