Brand:

• AKG

Models:

• H85

Overview:

The H85 uses elastic bands (often called suspension cords) to isolate the microphone from vibrations, handling noise, and stand movement.  Over time, these bands can stretch, dry out, or break, reducing shock absorption and letting unwanted noise through.

This article outlines the steps for changing or replacing the elastic band suspension on an H85 shock mount.

Removing the Old Elastic Band
 

1.    Place the shock mount on a flat surface.

2.    Select one of the two elastic bands. (Either top or bottom).

3.    Locate the elastic’s metal sleeves and detach either one. 

4.    Slide the elastic loop out of the first notch, choosing to start to the right or left. 

5.    Remove the elastic from the hooks, following its path back to the same side you selected earlier.

6.    Remove the band completely.

Installing the New Elastic Band
 

1.    Use the metal clamps for reference.

2.    Attach the first metal sleeve (Yellow Arrow) to the hook closest to the mic stand and to both the left and right anchor points.

3.    Stretch the band downward to the right or left hook in the outer mount. 

4.    Stretch the band upward to the anchor point and keep following to the inner mount hook.

5.    Continue by guiding the band through the missing hooks and anchor points until installed. 

6.    Repeat the same steps to remove and replace the second band if needed.