Brand:

• AKG

Models:

• H100

Overview:

The H100 uses elastic bands (often called suspension cords) to isolate the microphone from vibrations, handling noise, and stand movement.  Over time, these bands can stretch, dry out, or break, reducing shock absorption and letting unwanted noise through.

This article outlines the steps for changing or replacing the elastic band suspension on an H85 shock mount.

Removing the Old Elastic Band

1.    Place the shock mount on a flat surface. 

2.    Select one of the two elastic bands. (Either top or bottom) 

3.    Unhook the elastic loop out of the first hook, choosing to start to the right or left. 

4.    Unthread the elastic from the hooks, following the path to the same side you chose before.

5.    Remove the band completely.

Installing the New Elastic Band
 

1.    Let's use the inner hooks for reference. (Yellow arrow).

2.    Attach the band to the hook closest to the mic stand and to both the left and right anchor points (Red arrows).

3.    Stretch the band downward to the right or left hook.
 

4.    Stretch the band upward to the anchor point and keep following to the inner mount hook.

5.    Continue by guiding the band through the missing hooks and anchor points until installed. 

6.    Repeat the same steps to remove and replace the second band if needed.