Front Panel Configuration with ZonePRO Designer
Video Manual Series
Written by Will Fraser
Updated at February 25th, 2026
Table of Contents
Part 19: Front Panel Configuration
In this ZonePRO Video Manual Series, we will thoroughly go over the ZonePRO series by showing you how to get connected to the GUI Designer software, configure the device using the Configuration Wizard, set up ZC Zone Controllers, set up a scheduler, program scenes, and develop an understanding of its DSP processing capabilities and how to use them.
If you have a dbx 641, 641m, 1261, or 1261m ZonePRO processor, skip to the NEXT PAGE.
In this tutorial, we will continue to program the device inside of the Configuration Wizard on the next page titled "Front Panel Configuration". Here you will be able to show or hide parameters to be seen on the front panel. This is useful if you do not want the customer to be able to control paging, mutes, or gain for your zones from the front panel.
NAVIGATION PANEL | ||
***Insert Script Here***Related Videos
Table of Contents