Using Fixtures as sACN‑to‑DMX Nodes
Frequently Asked Questions
Written by Andras Schober
Updated at April 16th, 2026
Table of Contents
Brand:
- Martin
Question:
Do any Martin fixtures support sACN input and DMX pass‑through for controlling additional fixtures?
Answer:
Currently, Martin fixtures cannot be used as sACN nodes. This means the control signal type must stay the same for all fixtures in the chain.
Additional Information:
- If sACN is sent to the first fixture, the same sACN signal must continue to all other fixtures. It is not possible to change from sACN to DMX using a fixture.
Related Videos
Table of Contents