Importing Firmware in Dante Updater
Written by Gary Brindley
Updated at February 5th, 2026
Table of Contents
As of Dante Controller Version 4.2.7.1 all of the functions of Audinate Firmware Update Manager have been incorporated into Dante Updater which is included in Dante Controller. This guide will cover importing the firmware into the LIBRARY section and then updating the firmware in the HOME section.
The first step is to enable import firmware. This is located under burger menu and Advanced Settings.
Under Advanced Settings Check ALLOW IMPORTED FIRMWARE
Next go to the LIBRARY section and expand IMPORTED FILES then select IMPORT FIRMWARE
Firmware updater will ask you to point it to the location of the firmware files.
The correct firmware files are located in the Audio Architect folder under C:\Program Files\Harman Pro\Audio Architect 2.25\Firmware Updates folder. Soundweb London products use the Soundweb London Dante.dnt file, Crown DCI Amplifiers use the respective DCI files. Once imported they will show up under the Imported Files section.
Once the firmware file has been imported, you can then go to the HOME section and select update/reload under IMPORTED FIRMWARE FILES.
NOTE:
Reload is only available if you have enabled rollback in the advanced settings.
