Brands:

• AMX
• BSS Audio

Models:

• AVX Control

Overview:

This article will walk through deploying custom control panels to the AVX Control app.

To see a video of this article, click HERE.

Description:

In this example, the AVX Control app is on the same Windows computer running AVX Architect.

Open the AVX Architect project with the DSP design and UI DESIGN​​ panel for loading to AVX Control.

Launch the AVX Control app. It will load in the default state awaiting a control panel.

In the upper left corner, select the Hamberger menue and select settings.

Rename the panel “CP1", and give it a location of “Office".

Next, add a control device to our project file in AVX Architect. In the SYSTEM view left pane, AVX Control devices can be found under the CONFIGURABLE DEVICES list. For this example select a Windows AVX Control instance.

Select the newly added AVX Control object and rename it in the properties window. The name should match what was set in AVX Control, “CP1".

Select the panel to deploy under the UI ASSIGNMENT section.

Next, select Enable Networking from the top right of the AVX Architect window.

The objects will now have a yellow banner and say “Matched" indicating that they have associated with the devices on the network.

Select “Deploy and Connect" in the top right of AVX Architect.

The deployment wizard will open showing the two devices.

The DSP is already loaded and is set to receive from the parameter sync.

The Panel, CP1, shows that it's ready to be loaded.

Loading this panel can be ignored. Select the panel from the checkbox then change the action to Ignore.

When ready, select “Deploy and Connect" in the bottom right of the window. Once finished deploying, the devices will be highlighted green and show these check marks.

Checking the AVX Control App, now the custom panel deployed has populated and is controlling​ the DSP.

​