Question:

Why does my DCi DA amplifier reboot whenever certain Dante sources are selected?

Answer:

When a Dante source channel name has 6 or more space characters, 0x20, the amp will likely reboot when its cross point is selected.
This issue is mostly related to the number of spaces in the Dante source channel name, but its length also plays a part.
A length of 30 or 31 characters is OK, if you don't ha​ve 6 or more spaces. If the name is shorter it can have 6, but not 7. 

For example...

Short channel name, no problem with 6 spaces:
01 2 3 4 5 6 no-crash

Short channel name, 7 spaces will cause a problem when the crosspoint is selected:
01 2 3 4 5 6 7 crash

29-character name, no problem with 6 spaces:
01 2 3 4 555 6666666 no-crash

30-character name, 6 spaces problem when the crosspoint is selected:
01 2 3 4 5555 6666666 cc-crash

This problem was found to occur with DCi DA Hi Qnet v1.0.3.1 amps, with Brooklyn II Dante Product v1.19.0, Dante v4.2.3.13 cards, using Dante Controller v4.13.x software.

There is currently no ETA on when this issue may be fixed, as of 10/29/2024.
If you have a source name with a lot of delimiters, please use dashes "-" or underscores "_" instead of spaces, for now. ​​