Brands:

• AMX
• BSS Audio

Models:

• AVX Architect

Overview:

This article continues the exploration of the VIRTUAL view in AVX Architect and explains the Logic Truth Table.

To see a video of this article, click HERE.

Logic Truth Table:

The Truth Table can be found in the VIRTUAL LIBRARY under Processing of the Logic section.

The Truth Table sets its outputs according to rules associated with its input states. The input is in binary format.

The Truth Table can be configured to define the state of the outputs for each input state. Alternatively, a CSV file can be imported. This will be covered in greater detail in another article.

The Truth Table does not include a control panel. All settings are configured under OPTIONS in the PROPERTIES pane.

The number of inputs can be defined here and is selectable up to 12 inputs.

Below that is the number of outputs, which can be set up to 32.

For this example the Truth Table is set to the default configuration of two inputs and two outputs. Select the Truth Table Edit button to open the Truth Table editing window.

The Truth Table displays input states in the first column and the states of the two outputs in the next two columns.

The first row shows the input state with both inputs off.

Configure this state so that when both inputs are off, both outputs are on.

Double-click the 1 or 0 in the table to change its state.

Next, configure the second state so that only output two is on when only input one is on.

For the third state, configure output one to be on when only input two is on.

The fourth state, with both inputs on, will result in both outputs being off.

Observe how the outputs respond to these changes as the input states are toggled.​