Brands:

• AMX
• BSS Audio

Models:

• AVX Architect

Overview:

This article explains the process of exporting parameters from an Audio Architect project file and importing them into AVX Architect for use with AVX control panels. A Soundweb OMNI processor with both the MUSE and HiQnet extensions enabled is required.

To see a video of this article, click HERE.

Procedure:

Begin in Audio Architect with the legacy venue file already loaded. This example includes two Soundweb London devices and one Crown amplifier.

In the top-left corner of Audio Architect, select File, then choose Export Parameters as JSON.

A popup window will appear reminding the user they can also perform the export on just a control panel for a smaller export data set.

After slecting OK, a Windows Explorer popup will appear to select the destination for saving the file.

Once the file has been saved, open AVX Architect.

Ensure the OMNI processor is placed in the workspace.

On the top bar, to the left of the resource meters, locate the up-arrow button used for importing legacy devices.

Select the previously exported file and click Open.

The imported object(s) will appear in the SYSTEM view, representing each device from the Audio Architect file. ​ 

Navigate to the UI DESIGN view.

The imported devices will now be visible in the Parameters Tree located in the left pane.

Expand the Blu-806, to access its parameters.

Drag desired parameters, such as mixer gain and mute, directly onto the workspace or onto an existing control.