Anytime Help Center

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Support
  • Guest
  • Log In
  • AKG
    Microphones Wireless Integrated Systems Automatic Mixers Headphones Discontinued Products (AKG) Video Manual Series (AKG) General AKG Inquiries Certifications (AKG)
  • AMX
    Networked A/V Distribution (AVoIP) Traditional A/V Distribution Video Signal Processing Architectural Connectivity User Interfaces Control Processing Power (AMX) Programming (AMX) Software (AMX) Discontinued Products (AMX) Video Manual Series (AMX) General AMX Inquiries Certifications (AMX)
  • BSS
    Soundweb™ OMNI Soundweb™ OMNI AVoIP Soundweb™ London Soundweb™ Contrio™ Software (BSS) Discontinued Products (BSS) Video Manual Series (BSS) General BSS Inquiries Certifications (BSS)
  • Crown
    CDi DriveCore Series CDi Series Commercial Series ComTech Series DCi DriveCore Series I-Tech HD Series XLC series XLi Series XLS DriveCore 2 Series XTi 2 Series Software (Crown) Discontinued Products (Crown) Video Manual Series (Crown) General Crown Inquiries Certifications (Crown)
  • dbx
    CX Series 500 Series DriveRack Personal Monitor Control ZonePRO Zone Controllers FeedBack Suppression Microphone Preamps Dynamics Processors Crossovers Equalizers Software (dbx) Discontinued Products (dbx) General dbx Inquiries Certifications (dbx)
  • FLUX::
    Immersive Processing Analysis Subscriptions General FLUX: Inquiries
  • JBL
    Cinema Sound Installed Live Portable Tour Sound Recording & Broadcast Software (JBL) Discontinued Products (JBL) Video Manual Series (JBL) General JBL Inquiries Certifications (JBL)
  • Lexicon
    Plugins Effects Processors Cinema Discontinued Products (Lexicon) Video Manual Series (Lexicon) General Lexicon Inquiries Certifications (Lexicon)
  • Martin
    Atomic ELP ERA Exterior MAC Macula P3 VC VDO Tools Discontinued Products (Martin) Video Manual Series (Martin) General Martin Inquiries Certifications (Martin)
  • Soundcraft
    Digital Analog Connected Analog Only Discontinued Products (Soundcraft) Video Manual Series (Soundcraft) General Soundcraft Inquiries Certifications (Soundcraft)
  • General HARMAN Inquiries
    Dante
+ More
  • Home
  • FLUX::
  • Immersive

Troubleshooting SPAT Revolution with DAW automation reading

Frequently Asked Questions


Written by Peter Stauber

Updated at November 18th, 2026

Table of Contents

Brand: Models: Troubleshooting SPAT Revolution with DAW automation reading

Brand:

  • FLUX::

Models:

  • SPAT Revolution

Troubleshooting SPAT Revolution with DAW automation reading

First, determines if you are using Local Audio Path (LAP) or OSC.

  • The SPAT Send and Return plugins use LAP automation when the « Enable » of the plugin is activated, i.e. when the audio is sent to SPAT Revolution via the plugin.
  • When the LAP is deactivated, i.e. the "Enable" button is off, OSC is used to control the objects.
  • OSC is used always used for the SPAT Room plugins.

Automation reading with Local Audio Path

  • Ensure your DAW and the wanted track automation status are set to "Read" or "Touch".
  • On the « Item» page on SPAT Revolution, check if the "Automation" field of the wanted source is enabled. This parameter allows disabling the incoming automation input.
  • If the automation does not work, on the SPAT plugin, please check if the field « Publish changes in main thread » is set according to the following wanted status for your DAW:
    • ON: Ableton Live, ProTools, Steinberg products (Cubase, Nuendo, Wavelab), StudioOne
    • OFF: all others
  • Finally, check if the source index in SPAT Revolution and the plugin source index are the same. It can sometimes, according to the DAW, causes issues.

If it doesn’t work, please contact us.

Automation reading with OSC

  • Make sure the OSC is configured on both SPAT Revolution and SPAT plugin sides, i.e. the address IP and the port number are set. Use 127.0.0.1 if DAW and SPAT Revolution are on the same machine. 
  • On SPAT Revolution, make sure OSC Enable is checked.
  • To check if SPAT Revolution receives the OSC data sent by the plugin, enable the "Command log" on the OSC preferences panel, then open the terminal (menu Help, or F7). The OSC input message will be shown in it. If no OSC input message is displayed, there has been an error configuring the address and port.
  • Make sure the plugin source index and the source remote index in SPAT are the same. On SPAT Revolution side, the remote index is located on the Item page.
  • On the « Item» page of SPAT Revolution, make sure « Remote » is on for the wanted sources.
 
 

 

 

Related Videos

Was this article helpful?

Yes
No
Give feedback about this article

Table of Contents

Brand: Models: Troubleshooting SPAT Revolution with DAW automation reading

Related Articles

  • VST – Automation parameters not accessible
  • Windows – Problems with graphics, text and other GUI related issues in VST plugins (Windows Only)

Related Articles

  • VST – Automation parameters not accessible
  • Windows – Problems with graphics, text and other GUI related issues in VST plugins (Windows Only)
Copyright © HARMAN Professional. All rights reserved. Privacy Policy | Terms of Use
Expand