Qestion How are firmware updates managed for the BLU-100? Answer Firmware updates are applied through Audio Architect, which checks compatibility.......

Question: What is the audio latency of the BLU-100? Answer: The BLU-100 has an A/D latency of 37/Fs (~0.77 ms.......

Question: Does the BLU-100 support Dante or AVB? Answer: No, the BLU-100 does not support Dante, AVB, or Cobranet. It.......

Question: What is the recommended operating temperature range? Answer: The BLU-100 is rated for 0°C to 40°C (32°F to 104°F).......

Question: What are the power requirements for the BLU-100? Answer: It operates on 100–240V AC, 50/60Hz, with a standard IEC.......

Question: Can the BLU-100 be controlled remotely? Answer: Yes, the BLU-100 can be controlled remotely via Ethernet, serial RS-232, and.......

Question: What is in the BLU-50 shipping box? Answer: 1 x BSSBLU50M 1 x AC Power Supply 12VDC 2.5.A 1.......

Question: What is the input/output configuration of the BLU-100? Answer: The BLU-100 provides 12 analog inputs and 8 analog outputs,.......

Question: Does the BLU-100 support phantom power on its inputs? Answer: Yes, each analog input can be individually configured to.......

Question: What are the software requirements for BLU-50v2? Answer: The BSS BLU-50v2 signal processor requires either Hi Qnet Audio Architect.......

Introduction Troubleshooting Vo IP issues can be difficult especially if they are intermittent. One solution for this is to setup.......

This video discusses the low-cost “Fixed I/O” Soundweb London devices: the BLU-50, BLU-100, BLU-101, and BLU-102. Transcript ***Insert Script Here***....