​​​​
 

Basic Definitions of Antennas 

​Antennas can transmit as well as receive radio waves in a particular 

frequency range 

Properties of Antennas 

• A receiving antenna converts electromagnetic radiation (radio waves) 

into an alternating current or voltage. 

• A transmitting antenna converts an alternating current or voltage into 

electromagnetic radiation (radio waves). 

• Antennas are transducers that convert the electromagnetic wave from 

free progressive waves into pipeline bound waves -or vice versa.

free progressive waves into pipeline bound waves or vice versa. 

• All antennas have directional qualities. They do not radiate power 

equally in all directions. 

• The gain of an antenna increases with the amount of its directivity. 

​• Antenna gain and directivity are strongly related to each other. 
 

Polarization of Antennas 

​• The polarization of an antenna is the orientation of the electric field of the radio

wave with respect to the earth‘s surface. 

• Polarization can be vertical, horizontal or circular.

• It is determined by the physical structure of the antenna and by its orientation. 

R. Fochler 2013 

• It has nothing in common with the term „Antenna directionality“ 

​• A linear polarized antenna (vertical or horizontal) radiates in one 

plane containing the direction of propagation. 

• In a circular polarized antenna, the plane of polarization rotates in a 

circle making one complete revolution during one period of the wave. 

Types of Antennas 

The dipole is a very common antenna and it is half a wavelength long. 

This antenna works best when the waves arrive broadside. 

Due to smaller housing sizes, the length of transmitter-and receiver 

antennas are usually matched to ¼ of a wave length. 

 

The higher the frequency range, the shorter the antennas! 

• Yagi -Uda antenna 

​A dipole which shows a narrow directivity and a high antenna gain through an 

array of directors and reflectors. The number of directors and theire length 

determine the bandwidth and the frequency range of the antenna. 

• Logarithmic Periodical Dipole antennas (Log Periodicals) 

​Array of dipoles connected with each other via a feeder line. The length and 

spacings of the elements increase logarithmically from one end to the other. 

• More complex forms , variations of the dipole 

​Dipoles may be used as standalone antennas themselves, but 

they are also employed as a feed antenna (driven element) in 

many more complex antenna types, such as: 

-Yagi antenna, 

-Parabolic antenna, 

-Log periodic antenna, 

-Ground plane antenna 

Antenna patterns 

​• Constructive elements can change the directivity of antennas 

• To describe these qualities of directivity, there are 2 common forms to 

line out the beamwidth in a plot 

                                                                                                                                                                          Horizontal             

Evolution and Propagation 

​Magnetic field evolution of a vertical oriented Dipole 
 

Antenna Gain 

• An antenna's gain is a key performance figure which combines the 

antenna’s directivity and electrical efficiency. 

• As a transmitting antenna, the figure describes how well the antenna 

converts electrical input power into radio waves headed in a specified 

direction. 

direction. 

-Gain is needed for long distance radio links 

• As a receiving antenna, the figure describes how well the antenna 

converts radio waves arriving from a specified direction into electrical 

power. 

-Gain is needed to overcome long cable runs 

• The ideal omnidirectional radiation from a point source would be an 

isotropic antenna. 

• Antenna gain is usually expressed with reference to an isotropic 

radiator. (dBi) 

• Antennas cannot create gain 

• Gain is achieved by radiating more energy in some directions than 

others.

  • Total radiated power cannot be more than the power input to the 

antenna 

• Active elements like boosters can increase the gain of an antenna 

Antenna Cable 
 

​To remain quality and strength of a radio signal when converting from free-field into 
 

cable bound signal, it is essential to use antenna cable and connectors that meet 

certain specifications. 
 

Antenna Cable Specifications 

• Nominal Impedance 

-usually 50ohms 

• Velocity of propagation 

-between 65 – 87% (of SOL) 

• Capacitance 

 -between 75 – 95pF/m 

• DC resistance 

-inner conductor: 4-20ohms, outer conductor: 5-7ohm 

​• Attenuation 

-0,5 – 0,1dB/m 

Cable Attenuation 

 

Cable length adjustment 

​Passive antennas connected to 5m RG58 going to the receiver 
 

The input gain into the receiver should 

be as close as possible to 0dB! 

Passive antennas connected to 20m RG58 going to the receiver

​The input gain into the receiver should 

be as close as possible to 0dB! 

Active antennas connected to 5m RG58 going to the antenna splitter 

Active antennas connected to 20m RG58 going to the antenna splitter 

RF gain attenuation is possible when 

using an antenna splitter PS4000 / APS4! 

Passive antennas connected to 20m RG213 going to the receiver. 

AB4000W – Antenna Booster 
 

ASU4000 – Antenna Supply Unit ​

• Supplies up to three active elements (RA4000 B/EW, SRA 2 B/EW, AB4000, AB4000 EW) ​