Using a ZC-9 as a Program Change Selector with the DriveRack 260
Frequently Asked Questions
Written by Peter Stauber
Updated at August 13th, 2026
Table of Contents
Brand:
- dbx
Models:
- DriveRack 260
How do I setup my ZC-9 as a program change with the DriveRack 260?
Assign a ZC-4 under the Zone Controller section in Utilities. Make sure to match the 'Panel' # with the ID dip switch # on the side of the ZC-9 controller.
Below shows which binary # corresponds to each position on the ZC-9.
Binary 0 = Position A
Binary 2 = Position B
Binary 3 = Position C
Binary 5 = Position D
Binary 6 = Position E
Binary 8 = Position F
Binary 10 = Position G
Binary 11 = Position H
Related Videos
Table of Contents