AMX CTP-1301 Firmware

Please note that a readme file exists in the module zip file.

Release Notes

CTP-1301​

Release Date:     08/21/2017

[FWVERSION-SCALER_V5.0 TX-STM32_V4.0 TX-VS_V2.31.0.3 TX-IN2_V2.3 TX-IN3_V2.3 RX-STM32_V4.0 RX-VS_V2.31.0.3 RX-IN2_V2.3]

----------------------------------------------------------

Table of Contents
----------------------------------------------------------

1. Prerequisites
2. Features added in this release
3. Fixes in this release:
4. Notable Points
5. Programming Information
----------------------------------------------------------

1. Prerequisites
----------------------------------------------------------

- The SCALER FW for CTC-1402 should be v2.0 (or later)

- The EP FW for CTC-1402 should be v1.0 (or later)

- The ST MCU FW for CTC-1402 should be v1.0 (or later)

- The VS FW for CTC-1402 should be v7.0.0 (or later)

----------------------------------------------------------

2. Features added in this release:
----------------------------------------------------------

Features added in this release V5.0

2.1Add HDCP setting for HDMI output on WEB GUI, end-user can set the HDCP option as below:

Follow sink display;

HDCP1.4

HDCP 2.2

NO HDCP.

Note: When the source is encrypted, even if the end-user set the HDMI out as No HDCP, there is still not output on display;

2.2 Change Manufacturer ID to¡°1¡±(before is 504);

2.3 Change the pass-through (RS232-C) information as string format;

Fixes in this release. V5.0 08/21/2017

3.1 Optimize the experience when plug & pull HDMI out cable;

3.2 Add saving HDCP setting after power-cycle, and set as follow mode after reset;

3.3 Optimize the upload certificate feature;

----------------------------------------------------------

3. Fixes in this release
----------------------------------------------------------

3.1 Optimize the experience when plug & pull HDMI out cable;

3.2 Add saving HDCP setting after power-cycle, and set as follow mode after reset;

3.3 Optimize the upload certificate feature;

----------------------------------------------------------

4. Notable Points
----------------------------------------------------------

- There are some USB compatibility on some USB device

----------------------------------------------------------

5. Programming Information
----------------------------------------------------------

- Please upgrade the firmware (.kit) via ICSP, not any other specification notice.

Download:

• CTP-1301_V5_0_20190820.zip