THIELE SMALL LOW FREQUENCY DRIVER PARAMETERS AND DEFINITIONS1016-1406

Tech Support

Help Center / THIELE SMALL LOW FREQUENCY DRIVER PARAMETERS AND DEFINITIONS1016-1406

Thiele Small Low Frequency Driver Parameters and Definitions

Rating

Technical Support Guide

NOTE: The Parameters marked with an asterisk (*) are the minimum set required for a complete low-frequency system design.

SMALL SIGNAL

PARAMETER DESCRIPTION UNITS

*fs Resonance frequency of driver in free-air hertz

*Qts Total Q of driver at “fs" including all driver loss mechanisms dimensionless

*Eff Reference efficiency no (half-space acoustic load) %

VAS Volume of air having same acoustic compliance as driver

suspension cubic feet

Qes Q of driver as “fs" considering electromagnetic damping

only dimensionless

Qms Q of driver as “fs" considering mechanical loss mechanisms

only (non-electromagnetic) dimensionless

Le Voice coil inductance mH

LARGE SIGNAL

PARAMETER DESCRIPTION UNITS

*Pe(Max) Thermally-limited maximum electrical input power watts

Xmas Peak linear displacement of driver diaphragm millimeters

SD Effective projected surface area of driver diaphragm square meters

*VD Peak displacement volume of driver diaphragm (0 to peak) cubic inches

*RE dc resistance of driver voice coil ohms

MISC. DATA

PARAMETER DESCRIPTION UNITS

Dia Piston diameter inches

BL BL Product N/A

Mms Effective moving mass grams

flux Flux density tesla

** Excel sheet available, see dowloads section **

MODEL	FS	QTS	QMS	QES	VAS	EFF	PE	XMAX	RE	LE	SD	BL	MMS	FLUX*
112A	40	0.21	4	0.22	34	0.9	60	2.79	5.8	0.3	0.018	12	22	0.95
116A	28	0.46	5	0.51	73.6	0.3	50	4.83	5.2	0.6	0.018	6.7	25	0.85
122A	17	0.23	7	0.24	339.8	0.67	50	6.86	5.7	1.5	0.053	16	100	1.08
123A	25	0.49	8.5	0.52	235.1	0.68	50	7.87	4.4	0.6	0.049	8.9	85	1
124A	16	0.14	6	0.14	399.3	1.1	100	5.08	6.3	1.4	0.053	21	100	1.2
125A	25	43	7.5	0.46	235.1	0.77	50	4.83	5.2	0.7	0.049	7.5	32	0.85
127A	25	0.43	7.5	0.46	235.1	0.77	50	4.83	5.2	0.7	0.049	7.5	32	0.85
127H	25	0.43	7.5	46	237.9	0.77	50	4.83	6.6	0.7	0.032	7.5	33	1.07
127H-2	30.17	0.26	2.73	0.28	4.8	1.23	125	6	5.6	0.738	0.0345	11.3	34.6	11.3
127H-3	37	0.37	4.18	0.4	91	1.1	200	6	5.6	0.8	0.0358	10.8	36
127H-4	64.3	0.5	3.08	0.6	27.9	1.2	200	6	4.1	1.3	0.034	10	36
128H	20	0.24	7	0.25	280.4	0.86	100	7.87	5.7	0.6	0.053	16	90	1.07
130A	37	0.18	4	0.19	297.4	7.7	100	2.03	5.7	0.8	0.09	22.5	70	1.1
136A	16	0.21	5.5	0.22	736.3	1.4	100	5.08	6.3	1.4	0.008	21	151	1.2
136HS	35	0.38	7.7	0.4	153.5	1.59	300	7.87	5	1.5	0.008	20	146	1.22
165H	108	0.33	1.8	0.4	5.6	1.7	75	10	5.2	0.75	0.0141	9.8	10.9
195H	476	1.2	9.9	1.3	0.41		75	0.8	5.2	0.74	0.014	9.3	7.4
196H	492	1.2	6.5	1.5	0.298		125	1	5.1	0.75	0.0139	10	8.7	1.03
218F	45	0.38	4.2	0.42	26	0.55	200	15.7	1.8	0.15	0.215	6.1	31
218F-1	45	0.38	4.2	0.42	26	0.55	200	15.7	1.8	0.15	0.215	6.1	31
225J	76	0.38	3.3	0.44	4.9		225	6	9.7	1.9	99	11.1	11.5
226J	71	0.39	3.3	0.44	7.6		200	6	9.3	1.87	143	13.3	18.7
227H	34	0.43	10.53	0.45	77	0.7	120	7	5.75	3	0.0357	16.7	50
228H	69	0.32	5.5	0.34	16.1		187	6	5.25	1.13	0.0214	12.5	23.2
228J	68	0.3	5.4	0.32	16		187	6	11.3	2.5	0.0214	19	23.2
252F	24	0.29	67	0.3	171	0.75	150	7	1.38	0.35	0.053	8.4	103
252G	23	0.25	6.3	0.26	178	0.79	150	7	4.4	1.24	0.053	16.3	110
261F	77	0.52	2.9	0.63	17	1.1	300	6	1.2		0.0346	6.3	43	192
261G	82	0.52	4.7	0.058	15.5	1.4	300	6	2.6	1.03	0.0346	9.7	41	0.48
261H	75	0.39	3.2	0.45	22	2	300	6	5	1.03	0.0346	13.4	36	0.48
262F	53	0.36	3.56	41	55	20	300	4	1.47	0.24	0.056	9.15	69	0.52
262F-1	52	0.29	3	0.32	65	2.7	300	4	1.36	0.24	0.056	9.5	65	0.52
262G	53	0.36	3.56	0.41	55	2	300	3.5	1.47	1.47	0.056	9.15	69	0.52
262H	54	0.34	5.23	0.36	66	2.7	300	16	5.5	1.5	0.056	17.3	58	0.52
262H-1	54	0.34	5.23	0.36	66	2.7	300	2.5	5.5	1.5	0.056	17.3	58	0.52
265F	34	0.3	5.1	0.31	239	3	300	2.5	1.35		0.086		92	0.52
265F-1	34	0.3	5.1	0.31	239	3	300	2.5	1.34	1.03	0.086	9.5	92	0.52
265H	33	0.3	5.7	0.31	264	2.9	300	2.5	5.2	1.03	0.086	17.8	92	0.52
265H-1,-2	39	0.32	3.7	0.35	170	2.7	300	6.5	5.4		0.086	19.7	103	0.52
268G	38	0.34	5.7	0.36	219	3.1	350	6.5	2.6		0.128	17.7	186	302
275G	34	0.26	6	0.27	239	3.3	350	6.5	2.6	1.03	0.086	14.2	99	0.75
506G	50	0.5	2.5	0.65	19.8	0.42	50	10.67	4.5	0.6	0.014	6	13	1.05
508G	45	0.6	7.5	0.65	42.5	0.66	100	10.41	5.9	0.7	0.021	7	17	1
610H	75	0.63	4.68	0.72	23.4	1.4	175	6.2	5.5	0.454	0.035	11.1	27.6	0.71
612H	53	0.65	5.92	0.73	88.5	1.8	175	6.2	5.51	0.439	0.0555	10.9	46.7	0.71
615H	55	0.61	8.3	0.65	112	2.7	175	4.8	5.56	1.03	0.0881	9.49	35.98	0.88
725G	79	0.405	2.73	0.48	2.8	0.3	75	9.14	3.6	0.235	0.0084	7.38	14.4	1.27
1400	52	0.31	4.1	0.34	62.3	2.5	600	7.62	4.1	0.9	0.064	18.4	85	0.56
2012H	60	0.22	4.34	0.23	1.34	3.47	300	5	4.65		0.031	13.9	0.025
2020H	66	0.25	5	0.26	51.5	5.43	400	5.08	4.8	0.02	0.053	18.3	44	1
2022H	75	0.4	4.3	0.44	42.5	3.9	300	6.35	4.6	0.7	0.053	14.6	43	1
2023H	67	0.37	5.5	0.37	48.8	3.5	300	8.6	5.25	1.6	0.0547	16.2	45
2025H	48	0.22	4	0.23	78.4	3.55	400	7.11	3.9	0.15	0.053	16.6	55	1
2031H	44	0.28	6.1	0.3	6.7	5.3	450	5	5.12	0.6	0.0881	19.5	79	1
2032H	57	0.54	5.5	0.6	133.1	4	300	6.35	4.2	0.6	0.088	12.8	65	1
2033H	50	0.42	7.8	0.44	170	4.3	300	8.6	5.2	1.6	0.091	16	69
2035H	48	0.34	5	0.36	140.5	4.13	400	7.11	3.9	0.25	0.088	16.6	85	1
2035HPL	43	0.34	4.9	0.36	6.8	3.8	300	7	4.7	0.25	0.088	16.5	0.08	1
2042H	39	0.4	5	0.44	337	4.5	300	7.62	4.3	0.8	0.127	16.2	110	1
2043G	31	0.32	7.3	0.36	384	3.3	350	8	2.7	1.1	0.127	15.5	153	1
2044E	36	0.53	6.05	0.58	308	2.4	500	8	1	0.28	0.127	7.5	144
2044G	31	0.32	7	0.34	374	3.2	500	9.5	2.5	1	0.127	15.3	161
2044H	31	0.32	11	0.33	374	3.2	500	9.5	5	2	0.127	21.7	161
2103H	310	0.41	2.7	0.48	0.1	0.75		2.5	2.2		0.0024		1.66
2104H	207	0.66	207	0.87	1	0.9	50	1.3	4.24	0.5	0.0062	4.8	3.6	1.25
2105H	200	0.53	3	0.65	1	1.2	25	1.52	6.1	0.3	0.006	6.6	3.5	1.35
2106H	386	0.88	12.4	0.95	0.2	1.5	100	0.418	4.68	0.64	0.0095	8.79	9.65
2108	40	0.17	4.5	0.18	36.8	1.2	75	1.52	5.8	0.5	0.018	13	20	1.02
2110	60	0.31	3.5	0.34	34	2.1	25	2.54	6	0.3	0.021	6.8	11	0.85
2115A	55	0.48	4	0.54	34	1	30	5.59	5.5	0.3	0.018	6.8	11	0.85
2118H	85	0.35	2.4	0.4	14.2	2.1	100	3.05	5.5	0.6	0.021	11	17	1.05
2118J	85	0.35	2.4	0.4	14.2	2.1	100	3.05	10.3	0.9	0.021	15	17	1.05
2119H	78	0.37	4.5	0.37	0.5	1.68	175	2.54	5.3	0.55	0.0218			0.1
2120	65	0.36	4	0.4	45.3	3	75	1.52	6	0.4	0.032	10.3	17	1.02
2121	35	0.19	5.5	0.2	110.4	2.7	75	1.52	6.8	0.9	0.032	12.7	25	1
2121H	35	0.16	5.5	0.17	110.4	2.7	75	1.52	6	0.8	0.032	13.7	26	1.02
2122H	40	0.23	1.9	0.26	65.1	2.4	100	3.05	5.8	0.6	0.032	13.2	28	1.02
2123H	85	0.32	2.5	0.37	19.8	3.5	250	2.54	4.2	0.4	0.032	13	25	1.07
2123J	85	0.32	2.5	0.37	19.8	3.5	250	2.54	8.7	0.8	0.032	18.7	25	1.07
2125	45	0.45	4.5	0.5	135.9	2.5	50	2.54	6	0.5	0.053	12.4	45	1
2130	50	0.2	4	0.21	121.8	6.9	100	1.52	6.3	0.6	0.053	18	35	1.2
2135	40	0.25	4	0.27	297.4	6.7	125	1.52	6.3	0.6	0.089	18	60	1.2
2142H	72	0.75	4.2	0.92	45.3	1.82	100	6.35	5.2	0.85	0.053	9.95	46
2145A	30	0.51	12	0.53	155.8	0.76	50	3.56	5	0.4	0.044	9.4	50	1
2150	55	0.64	5	0.73	99.1	2.2	50	2.54	5.5	1	0.075	22.3	105	1.2
2152H	85	0.39	3.3	0.44	36.8	5.1	150	2.54	4.5	0.5	0.053			10.2
2155H	53	0.47	4.47	0.53	164.3	4.4	150	2.54	4.2	0.48	0.09			10.2
2166H	87	0.4	3.03	0.46	6.04	0.82			5.3		0.0143		16
2168H	120	0.38	5.5	0.41	3.71	1.6	350	7	5.2	0.9	0.019	15.3	23	1
2168H-1	70	0.3	5.6	0.32	9.2	1.3	350	6.8	5.1	0.93	189	14.2	28	0.82
2168J	122	0.04	5.8	0.43	3.4	1.3	350	7	10.1	1.6	0.019	21.3	25.5	1
2168J-1	77	0.4	5.7	0.42	8.3	1.3	350	6.4	10.1	0.24	189	17.5	27	0.82
2169H	320	0.61	6.5	0.68	0.55	1.3	200	3	5.1	0.9	0.02	19.8	26	1
2202A	50	0.17	3.5	0.18	87.8	5.5	100	3.05	5.5	1	0.053	22	50	1.2
2202H	50	0.16	3.5	0.18	87.8	6	150	3.56	5.5	1.1	0.053	22.5	50	1.2
2202J	50	0.16	4.3	0.18	87.8	6	150	3.56	11	1.8	0.053	27.8	50	1.2
2203A	16	0.14	6	0.14	399.3	1.1	100	5.08	6.3	1.4	0.053	21	100	1.2
2203H	16	0.14	6	0.14	399.3	1.1	100	5.08	6.3	1.4	0.053	21	100	1.2
2204H	45	0.35	1.7	0.44	87.8	1.8	350	6.86	6.2	0.7	0.054	15	57	1.2
2204J	45	0.35	1.7	0.44	87.8	1.8	350	6.86	12.4	1.6	0.054	25.5	57	1.2
2205A	30	0.21	5	0.22	297.3	3.5	150	2.54	5.5	1.3	0.09	22.3	105	1.2
2205H	30	0.21	5	0.22	297.3	3.5	150	2.54	5.5	1.3	0.09	22.3	105	1.2
2206H	52	0.32	4.45	0.34	62.3	2.5	600	7.62	5.3	1.5	0.055	18.1	65	1
2206J	52	0.34	4.5	0.37	62	2.21	600	7.62	9.9	3	0.055	24	66	1
2213	25	0.49	8.5	0.52	235	0.68	50	7.87	4.4	0.6	0.049	8.9	85	1
2213H	25	0.49	8.5	0.52	235	0.68	75	7.87	4.4	0.6	0.049	8.9	85	1
2214H	23	0.24	10.5	0.25	223.7	1.1	200	6.6	5.6	1.3	0.053	16	90	1.07
2215A	20	0.21	5.5	0.22	736.2	2.6	100	4.06	5.7	1	0.09	22	97	0.9
2215B	20	0.21	5.5	0.22	736.2	2.5	100	4.06	8.8	2.2	0.088	22	97	0.9
2215H	20	0.21	5.5	0.22	736.2	2.6	100	4.06	5.7	1	0.09	22	97	0.09
2217H	45	0.31	6	0.33	83.8	2.19	600	7.62	5	1.8	0.063	18.7	83	1
2220A	37	0.18	4	0.19	297.3	7.7	100	2.03	5.7	0.8	0.09	22.5	70	1.1
2220H	37	0.17	5	0.18	297.3	8.7	100		5.7	1.06	0.089	22.3		1.15
2220J	37	0.17	5	0.18	297.3	8.7	100		13.2	2.41	0.089	33		1.15
2225H	40	0.28	2.5	0.31	169.9	3.5	200	5.08	6.3	1.1	0.09	23	105	1.2
2225J	40	0.28	2.5	0.31	169.9	3.5	200	5.08	12.9	2.2	0.09	34	105	1.2
2226G	40	0.31	5	0.33	175.6	3.3	600	7.62	2.5	0.92	0.088	13.5	98	1.05
2226H	40	0.31	5	0.33	175.6	3.3	600	7.62	5	1.75	0.088	19.2	98	1
2226J	40	0.31	5	0.33	175.6	3.3	600	7.62	10	3.5	0.088	27.1	98	1
2227H	40	0.21	5	0.22	175.6	4.9	600	5.08	4.7	0.55	0.088	23	99
2231A	16	0.21	5.5	0.22	736.2	1.4	100	5.08	6.3	1.4	0.088	21	151	1.2
2231H	16	0.21	5.5	0.22	736.2	1.4	100	5.08	6.3	1.4	0.088	21	151	1.2
2234H	23	0.22	2	0.25	458.7	2.1	150	8.38	6	1.2	0.09	20.5	105	1.2
2235H	20	0.25	2.5	0.28	458.7	1.3	150	8.38	6	1.2	0.09	20.5	155	1.2
2240G	30	0.25	2.5	0.25	481.4	5	300	5.59	2.5	0.7	0.13	17.1	164	1.22
2240H	30	0.23	2.2	0.25	481.4	5	300	5.59	6	1.4	0.13	25	164	1.22
2241G	35	0.4	5.7	0.43	311.5	2.9	600	7.62	2.5	0.86	0.123	13.6	145
2241H	35	0.4	5.7	0.43	311.5	2.9	600	7.62	5	1.75	0.123	19.2	145
2242H	35	0.275	5	0.29	9.97		800	8	4.7	1.25	0.124	23.7	0.158
2243H	30	0.19	5	0.2	11.94		700	5	5.2	1.4	0.124	30.2	0.18
2245H	20	0.27	2.2	0.27	821.2	2.1	300	9.65	5.8	1.4	0.13	21	185	1.22
2250H	188	0.47	4.5	0.53	1.67	2	350	3	5.2	1	0.0204	17	25	1
2250J	185	0.45	4.8	0.47	1.5	2.3	350	3	8.7	1.7	0.0204	22.5	24	1
2251J	61	0.2	4	0.21	1.011	2.89	388	5.7	12.65		0.031	26.77	0.032
2254J	46.63	0.16	2.47	0.17	2.6	4.2	600	6.35	11.16		0.063	10.99	0.088
2255H	39	0.3	3.68	0.33	170	2.9	650	8	5	1.5	0.088	20.1	109
2256G	24.2	0.47	7.79	0.5	138.5		600	20.3	3.1	0.7	0.078	15.7	284	0.657
2258HPL/-1	31	0.27	4.82	0.28	407		800	8	5.2	1.24	0.124	22.3	140
2261H	65	0.36	6	0.38	19.3	1.4	500	6	5.1	1.3	0.0346	16.9	51
2261FF	58	0.31	4	0.34	29	1.6	500	6	2.6	0.28	0.0363	11.6	49	0.6
2262F	49	0.34	2.4	0.4	51	1.4	700	8	1.3	0.36	0.0547	9.45	88	0.52
2262FF	51	0.28	1.9	0.31	51	2.2	700	8	2.9	0.425	0.057	16	87
2262G	48	0.33	2.33	0.38	58.5	17	500	8	2.65		0.055	13	79	0.6
2262H	56.8	0.34	2.79	0.39	49.2	2.2	700	8	5.2		0.0547	18	68	392
2262HPL	56.8	0.34	2.79	0.39	49.2	2.2	700	8	5.2		0.0547	18	68	392
2263H	41.2	0.374	4.607	0.407	63.57		700	7.7	5.42	0.623	0.0552	18.7	100.9	313
2263H-1	41.2	0.374	4.61	0.41	63.57		700	7.7	5.42	0.623	0.0552	18.7	100.9	313
2264H	45	0.32	6.4	0.34	69	1.7	800	10	5.2		0.0552	18.4	80	0.98
2265F	43	0.41	3.4	0.46	127	1.9	750	8	1.35	1.9	0.088	9.9	125	0.6
2265G	38	0.35	3	0.39	162	2.2	750	8	2.5	0.8	0.088	3.5	116	0.6
2265G-1	42	0.37	2.8	0.43	133	2.3	675	8	2.45	0.8	0.088	13.6	116	0.6
2265FF	41	0.35	3.41	0.39	123	2.1	750	8	2.6	0.96	0.088	15.3	134
2265H	37	0.32	3.3	0.36	176	2.5	750	8	5.1	1.7	0.088	19.5	112	0.6
2265HPL	37	0.32	3.3	0.36	176	2.5	750	8	5.1	1.7	0.088	19.5	112	0.6
2265H-1	42	0.39	3	0.44	119	2	675	8	5.3	1.65	0.088	20.3	129	0.6
2266H	31	0.37	4.8	0.4	110	0.8	700	11	4.8	2.63	0.088	24.7	260	0.6
2267H	41	0.42	8.3	0.44	89	1.4	600	15	4.8	2	881	22.6	180	0.7
2268F	37	0.46	4.6	0.51	225	2.3	750	8	1.3	0.45	0.1295	10.4	180	0.595
2268FF	32	0.36	3.3	0.4	318	2.7	800	8	2.7	1.1	0.1269	15.4	172	0.49
2268G	29	0.35	4.4	0.38	386	2.4	750	8	2.75		0.1269	15.2	175	0.49
2268H	33	0.36	3.8	0.39	328	2.8	800	8	5.3	1.85	0.1269	21.5	168	0.6
2269G	26	0.39	7.5	0.41	234	0.9	1200	19	2.7	1.2	1225	19.2	340	0.6
2269H	28	0.36	4.8	0.39	237	1.2	1200	19	5.3	2.5	1225	26.4	294	0.6
2275H	46	0.41	3.8	0.46	107	2.1	700	8	5.1	1.4	0.088	19.8	124	0.59
2275F	39	0.42	4.8	0.47	145	1.8	700	8	1.3	0.34	0.088	9.2	122	0.59
2278H	34	0.43	6.3	0.46	291	2.3	750	8	5.3	1.5	0.1295	20.8	180	0.59
2279H	35	0.42	6.2	0.45	262	2.9	850	22	5.5	1.7	0.1295	21.9	178	0.59
2279G	33.7	0.41	6.1	0.43	282	2.4	850	10	2.8	0.419	0.132	16	194	0.6
2288H	29	0.43	8.5	0.45	106	1.2	1200	20	4.2	2.5	1232	23.6	279
D123	45	0.45	4.5	0.5	135.9	2.5	50	2.54	6	0.5	0.053	12.4	45	1
D130	40	0.25	4	0.27	297.3	6.7	75	0.76	6.3	0.6	0.09	18	60	1.2
D131	50	0.18	8.5	0.18	127.4	8.4	75	0.76	6.3	0.5	0.053	18	35	1.2
D208	60	0.31	3.5	0.34	34	2.1	25	2.54	6	0.3	0.021	6.8	11	0.85
E110	65	0.36	4	0.4	45.3	3	75	2.54	6	0.4	0.032	12.1	21	1.03
E120	60	0.17	1.8	0.19	79.3	8.6	150	3.05	6.3	0.4	0.053	21.7	36	1.35
E130	40	0.19	1.8	0.21	297.3	8.6	150	2.54	6.3	0.4	0.09	21.1	60	1.35
E140	32	0.17	5	0.19	297.3	4.9	200	3.56	5.5	1.11	0.09	24.1	94	1.35
E145	35	0.25	6	0.26	274.7	4.3	150	7.11	5.7	1.6	0.09	16.1	55	0.97
E155-4	30	0.2	2.2	0.22	424.8	4.9	300	5.08	2.5	0.7	0.114	17	125	1.22
E155-8	30	0.2	2.2	0.22	424.8	4.9	300	5.08	6	1.4	0.114	25	125	1.22
G125-8	65	0.32	5.5	0.34	70.8	5.5	200	2.54	5.2	0.5	0.053	13.7	37	0.98
G135-8	45	0.36	5.5	0.38	235	5.5	200	2.54	5.2	0.5	0.09	13.7	60	0.98
G135-A	45	0.48	6.6	0.51	218	3.8	200	6.1	6	0.75	0.09	15.8	60	0.98
K110	65	0.36	4	0.4	45.3	3	75	1.52	6	0.4	0.032	10.3	17	1.02
K120	50	0.2	4	0.21	121.8	6.9	100	1.52	6.3	0.6	0.053	18	35	1.2
K130	40	0.25	4	0.27	297.3	6.7	125	0.76	6.3	0.6	0.09	18	60	1.2
K140	30	0.21	5	0.22	297.3	3.5	150	5.08	5.5	1.3	0.09	22.3	105	1.2
K145	35	0.29	6	0.3	243.5	3.4	150	5.08	8.8	2.2	0.079	21.7	75	0.9
K151	30	0.27	6	0.28	365.3	3.4	150	2.54	6	2	0.107	22	125	1.2
LE5-10	250	1	3	1.6	0.7	0.69	25	1.52	6	0.05	0.006	4.3	3	1.3
LE8T	45	0.49	4	0.55	34	0.5	25	4.57	5.5	0.3	0.018	6.2	16	0.85
LE8TH	45	0.56	4	0.65	34	0.5	25	5.59	5.5	0.3	0.018	6.2	16	0.85
LE10A	30	0.41	6	0.44	101.9	0.6	75	6.1	4.4	0.6	0.032	8.1	35	1.02
LE10H	33	0.37	6.9	0.39	76.5	0.7	75	6.1	4.8	0.6	0.032	9.7	40	1.02
LE111A	25	0.17	6	0.18	101.9	0.87	75	6.1	5.7	1.5	0.032	16	50	1.08
LE12C	30	0.51	12	0.53	155.7	0.76	50	3.56	5	0.4	0.044	9.4	50	1
LE14A	28	0.32	6.5	0.34	147.2	0.95	100	5.08	6.3	1.4	0.066	21.5	140	1.2
LE14H	26	0.27	2.3	0.3	147.2	0.89	150	8.38	5.9	1.3	0.066	22	139	1.25
LE15A	20	0.21	5.5	0.22	736.2	2.6	100	4.06	8.8	2.2	0.088	22	97	0.9
MI-10	75	0.33	1.8	0.41	36.8	3.5	150	3.05	5.6	0.6	0.034	11.6	21	1.05
MI-12	65	0.46	2.2	0.58	76.5	3.5	150	3.05	5.6	0.6	0.055	11.6	34	1.05
MI-15	55	0.62	2.8	0.79	169.9	3.5	150	3.05	5.6	0.6	0.09	11.6	55	1.05
MI-15A	40	0.42	4	0.47	271.8	3.5	150	3.56	5.6	0.9	0.09	11.6	55	1.05
M121-8	60	0.245	4	0.25	70.8	6	300	4.57	5.2	0.63	0.053	17.5	39	1
M151-4	50	0.28	6	0.3	148.7	5.92	300	5.08	2.4	0.42	0.088	13.6	74	1
M151-8	45	0.25	4.8	0.27	198.2	6.5	300	5.08	4.8	0.72	0.088	18.8	70	1
M110-4	50.5	0.331	3.461	0.365	52		225		2.8	1.03	346	9.85	32.5	172
M110-8	57	0.305	4.7	0.33	60		225		5.15	0.698	339.8	12.21	32.9	172
M115-4	45.8	0.374	5.173	0.403	191.11		250		2.6		829.58	10.3	61.6	172
M112-8	79	0.36	2	0.44	0.45	4.8	225	5.1	5.2	1.2	0.0564	15.5	41.4
M115-8	46	0.42	9.5	0.4	230	5	225	5.1	5.5	1.3	0.083	13.9	53
M115-8A	46	0.39	5.1	0.42	225	5	250	5.1	5.5	1.3	0.0845	14	53
M209-8	91	0.39	2	0.48	13.3	2.01	150	1.78	4.9	0.27	0.022	9.5	16	1.05
M222-8	71	0.48	3.6	0.55	41.9	2.62	300	6.35	4.2	0.43	0.053	12.8	48	1
M252-8	51	0.56	4.6	0.64	137.1	2.71	300	6.35	4.2	0.43	0.088	12.8	79	1
MODEL	FS	QTS	QMS	QES	VAS	EFF	PE	XMAX	RE	LE	SD	BL	MMS	FLUX

Downloads

Product

Drivers

Topic

Designing

Last modified at 4/8/2024 2:10 PM by PRO Knowledge Base

International Tech Support

Customer Care

+1 800-222-0193

Technical Support

+1 844-776-4899

HProTechSupportUSA@harman.com

Mailing Address

HARMAN Professional Solutions

8500 Balboa Blvd.

Northridge, CA 91329

USA

Find post-sales support in your country

Find