​

NOTE: If the keypad is installed and you need help disassembling or reassembling the MCP-108 or the MCP-106 please refer to the end of this document.​

Step 1: Swapping the microSD card

Your MCP keypad should look very similar to the below picture. There may be tape over the microSD card. If there is tape, carefully remove the tape and set it aside, you will put it back over the new microSD card when you're done. Slide the old card straight out and slide the new card straight in, making sure it is seated all the way in. Put the tape back on if you removed it earlier.​