Version 2/7/2025 (v1.9.2)
- Fixed an issue with Local Play displaying sometimes
- Fixed an issue when disconnecting KVM routes
- Switching Stability Enhancements

Version 11/29/2024 (v1.8.8)
- Enhanced N-Act
- Stability Enhancements
- Security Patches

Version 11/12/2024 (v1.8.4 / 1.8.5)
- Fixed a timing issue with Local Play Holdoff timing
- stability of the stream switching for video
- Stability involving IGMP communications
- Enhanced N-Act
- Stability Enhancements
- Added audio capability to the playlist functionality
- Fixed an issue with EDID not saving from the webpage
- Fixed an issue with RS232 serial strings
- Stability Enhancements

Version 10/18/2024 (v1.8.1)
- Fixed an issue with Debug logging not being able to be downloaded
- Fixed causing issue with disconnecting USB/KVM signals using 0.0.0.0 address
- Stability Enhancements

Version 10/04/2024 (v1.7.9)
- Enhanced Support for H-Control
- Enhanced switching speed of streams
- Stability Enhancements

Version 9/20/2024 (v1.7.7)
- Added the ability to enable VLAN functionality on the encoder and decoder.
Separate the Dante traffic from all other traffic.
- Added OSD menu enable when pressing ID longer than 5 seconds and less than 20 seconds.
- Added the ability for the decoder to be used as a Dante TX when receiving an SVSI native audio stream.
- Added USB20Route command in getStatus
- Added the ability to turn off Dante Audio/Video from appearing in Dante Management tools.
- Enhanced the HARMAN Profile when using H26x between HARMAN devices. 
- Enhanced Support for HControl
- Enhanced Host/Local Play default images
- Fixed an issue with the USB disconnect on the video switch
- Fixed an issue with serial communications involving port 50004
- Fixed an issue where the HDCP screen could be shown when waking a PC from sleep. 
- Stability Enhancements

Version 6/28/2024 (v1.6.6)
- Added Low-power mode
- Enhanced EDID options by adding 4K30 EDID option
- Enhanced Support for H.26x
- Enhanced Support for H-Control
- Enhanced Support for N-Act 
- Enhanced HDCP advertisement for systems with mixed supported HDCP Type (1.x or 2.2 Displays)
- Enhanced the H26x Profiles
- Enhanced firmware updating to streamline the process
- Enhanced the firmware upgrade progress when updating the H.26x FW
- Enhanced the Host/Local Play batch upload N-CMD functionality
- Fixed an issue with custom multicast addresses
- Stability Enhancements

Version 3/05/2024 (v1.4.2)
- Added Dante AV-A Support
- Added Support for H-Control
- Added Last Frame Hold to the decoder
- Added Multicast address override
- Added Virtual Network USB 2.0 (Supports USB 2.0 from up to 4 decoders to 1 encoder)
- Added SVSI N-Act events
- Added Syslog connection
- Added ID button functionality
- Enhanced the Host/Local Play functionality
- Enhanced HDCP advertisement for systems with mixed supported HDCP Type (1.x or 2.2 Displays)
- Fixed issue: if an encoder has no source, it will cause the unit to have an extended boot time
- Fixed Default EDID to Stereo (2-Channel)
- Stability Enhancements
- Security Patches

Version 11/30/2023 (v1.2.2)
- Added Host/Local Play functionality
- Updated Video Wall functionality
- Stability Enhancements
- Security Patches

Version 11/08/2023 (v1.1.9)
- Stability Enhancements
- Security Patches

Version 10/18/2023 (v1.1.7)
- Updated Video Wall functionality to the decoder
- Corrected issue where device model description change
- Stability Enhancements
- Security Patches

Version 10/6/2023 (v1.1.6)
- Added Video Wall functionality to the decoder
- Stability Enhancements
- Security Patches

Version 07/19/2023 (v1.0.9)
- Initial Release​