Early Access Firmware Disclaimer:
Early Access software has not been fully tested and has only been checked for the issues it addresses. Some features may be incomplete, subject to change, or may not function as intended. You might experience unexpected errors, limited functionality, or disruptions, and the software's stability may vary. We encourage you to send feedback through our Technical Support team. While we appreciate and welcome your input, we make no guarantees about implementing specific changes. Please also note that support for early access software is limited, and response times for fixes will vary. By using this Early Access Software feature, you acknowledge that it is provided ‘as-is’ and agree to assume the risks associated with pre-release software.
Last Updated: May 18, 2025
Product Name: N-Command
FG #: N-8002
N-8012
Version: 5.2.25
Release Date: 2025-05-18
----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------
**CAN NOT BE USED TO UPDATE N8001**
**CAN NOT BE USED TO UPDATE N-COMMANDS on REV E**
N-Command:
In the Help Menu >> About-Help under Version Information. If the Revision field listed is something other than "F", you must upgrade using the "Joint OS Upgrade" zip file.
N-Able PC:
Minimum version of N-Able must be 5.1.6,
https://www.amx.com/en-US/product_families/amx-n-able-control-software
----------------------------------------------------------
2. Known Issues
----------------------------------------------------------
If using Panel Builder and using Firefox, you must accept the self-signed certificate first before Panel Builder will work by going to https://<IP-Address>:3002
----------------------------------------------------------
3. Revision History
----------------------------------------------------------
5.2.25
- Fixed an issue preventing Panel Builder from Importing Projects
5.2.19
- Performance Improvements to Firmware Update Application
- Stability Enhancements
5.2.13
- Stability Enhancements to work with Rev. F. of N-Command
5.1.12
- Added native commands for video wall on/off for N2600 Series
- Added a firmware field to unit management displaying the primary version and H26x if dealing with N2600S units
- Added auto-login when opening units from the units management settings via clicking on their IP address
- Updated switch, all has been removed from the matrix.
- Updated commands for switchkvm and switchusb for the N2600 Series
- Stability Enhancements
5.0.17
- Stability Enhancements
5.0.13
- Improved the response timing when using serialhex commands
5.0.12
- Stability and Security Enhancements
5.0.10
- Changed from a Date Version to a Numerical Version
- Added the N3300 Series
- Stability and Security Enhancements
2023-11-25
- Corrected an issue when uploading certificates
- Corrected an issue with the user/group accounts
- Corrected an issue with updating endpoint firmware from N-Command
- Stability and Security Enhancements
2023-10-21
- Continued updates on the N2600 compatability
- Added support for N4321D
- Corrected an issue with users/groups
2023-04-18
- Updated an issue with Wall Builder
2023-04-02
- Security Improvements
- Merged N2600 into the N-Command
2023-03-08
- Updated an issue with Batch Uploads
- Security Improvements
2022-12-26
- Updated the OS Update File to Rev E
- Security Improvements
2022-11-12
- Corrected an issue when importing Databse where units would not show in the unit migration listing
2022-07-03
- Corrected an issue with the Batch 1-1 which would not allow transfer to complete. **See known issues below**
2022-05-28
- Corrected an issue with the DataBase restore functionality.
- Corrected a potential issue where the Physical RJ45 ports could be swapped during "Joint OS Upgrade".
2022-05-15
- Corrected an issue supporting Port Forwarding for legacy SVSi units.
- Performance improvments after applying Joint OS Upgrade package.
2022-04-25
- Security fixes
- Performance Improvements
- N3K preview enhancements
- Fix the serialhex response
- Fix Apache vulnerability
2021-12-13
- Added N3000 video preview when hovering over the source in the video matrix window.
- Added AES67 CSV import and export functionality
- Panel Builder Security Issues Fixed
2021-09-12
- Created an OS upgrade file to allow upgrades in the field to the new OS
- Added ability for TLS 1.3
- Enforcing HTTPS connections to WebUI only
- Relabel USB to KVM matrix
- fixed bug with navigation when clicking delete in the firmware section
- Security Vulnerability Fixed
2020-02-14
- Added 4k scaler resolutions to units when viewing unit webpages through NCommand
2018-03-15
- Removing support for TLSv1.0 in NCmd secure sockets
- Removing support for TLSv1.0 in Panel Builder secure sockets
- Legacy port forward method enabled on-demand (auto-expires after 1 hour)
- Serial tpc script commands bug fix
- Improved N2410 4K support in wall builder
UPDATEINFO.eyJoIjoiZWY3N2FlNiIsInQiOiJOLUFibGUiLCJ2IjoiNS4yLjIifQ--
