HARMAN Anytime Help Center

Darin Olsen

darin.olsen@harman.com

Article
Last Month

-50.0%

Darin articles

All Categories

All Categories
AKG
AMX
BSS
Crown
dbx
Flux::
JBL
Lexicon
Martin
Soundcraft
General HARMAN Inquiries

Configuring Ubiquiti UniFi Switches for Harman SVSI Deployments

Published February 27th, 2026 by Darin Olsen

Brand: AMX Models: UniFi Pro Max switches All AMX/SVSI encoders and decoders Overview: Part 1 This article provides step-by-step guidance for configuring Ubiquiti UniFi network switches for use with Harman SVSI video-over-IP systems. It covers VLAN setup, jumbo frames, IGMP snooping, querier configuration, and port-level AV profiles. These steps app

SC-N8002 N-Command 2.0 serial scripts

Published February 18th, 2026 by Darin Olsen

Brand: AMX Models: SC-N8002 Question: What is the recommended way to do serial control from N8002 Script Builder? Answer: Use tcpclient in N8002 N-Command Script Builder for serial commands. If you have the serial command saved on the encoder/decoder, then you can create a script:tcpclient <ip address> <50001 or 50002> sendser:<n

Gathering Syslog Message Using N-Able

Published March 3rd, 2026 by Darin Olsen

Brand: AMX/SVSI Models: AMX/SVSI N2600 and N3300 Series Encoders and Decoders Overview: Syslog messages provide real time log output from encoders/decoders and are helpful in troubleshooting network, video, or communication issues. Requires: N-Able software version 5.1.77 or higher. Download N-Able control software Enable Syslog Viewer in N-Able 1.