​​​Question:

Is it possible to add my DMS800 to a Dante Domain using Dante Domain Manager?

Answer:

Yes, if you are using a device with Dante FW v4.0 or above. 

If you need to update your Dante FW please Launch Dante Updater to review the available updates and update the device(s). Dante Updater is a desktop application that allows you to update the Dante firmware and software on Dante hardware devices. It is installed automatically when you install Dante Controller.

The application is linked to an online database containing firmware update files for products from multiple manufacturers. When the application is connected to a Dante network, it scans the network and identifies the firmware versions for each discovered Dante device. If newer firmware for any device is available in the online database, you can update the device using the online file, or download the firmware file to your local machine for offline use. If firmware is found for multiple devices in your network, you can choose to update all devices simultaneously.

Workaround:

Devices with some legacy (pre-v4.0) versions of firmware can be also 'associated' with domains. This adds them to the relevant clock domain, and allows them to exchange audio with devices enrolled in the same domain, which are also on the same IP subnet (legacy devices do not support audio routing between subnets).

Support for legacy devices can be enabled globally in the Network & Security settings of DDM, and at domain level in the Domain Details page.