RUSH MH 7 Hybrid- Lamp replacement
Lamp replacement
*Warning! Wear safety glasses and gloves when handling lamps. Allow the fixture to cool for at least 1 hour before handling a lamp.*
The lamp must be perfectly clean and totally free of oil and grease. Never touch the lamp with bare hands. If you contaminate the lamp, clean it with an alcohol wipe and then dry it with a lint-free cloth.
1. Disconnect the fixture from power and allow it to cool for one hour.
2. Remove the lamp cover using a Phillips screwdriver.
3. Squeeze and unhook the ends of the lamp retaining spring. Pivot the spring away from the lamp.
4. Carefully pull the lamp wires off of the connection pins. Remove the lamp.
5. Avoid direct contact with the new lamp. Either wear clean lint-free cotton gloves or hold the lamp with the included cloth. Remove the new lamp from its packaging and attach the wires to the connection pins.
6. With the connection pins pointing to the left, away from the retaining spring, seat the new lamp in the fixture. Secure the lamp with the retaining spring.
7. Reinstall the lamp cover before applying power.
8. Reset the lamp hours counter as described in (Lamp hours).
***To avoid the risk of a discharge lamp exploding in the fixture, replace the lamp when it reaches its average lifetime (2000 hours). Install only lamps that are approved by Martin™ for this fixture (Philips MSD Platinum 11R 250 W).***
