​

JEM Hazer/ Compact Hazer Pro- Priming the machine​​

Priming the machine 

If the machine runs out of fluid it should be shut down to prevent damage to the pump. To suck the new fluid back into the machine, replace/refill the fluid reservoir and use the prime function.

• Use the Previous / Next buttons to select the PRME option.
• Use the Up/Down buttons to change the option to Y.
• Press the Enter button to start the priming function.

The machine will pump at full power for about 10 seconds or until the unit senses fluid in the heat exchanger. To exit this menu if you decide not to activate the Prime function, select N and press Enter.

If the machine is not up to operating temperature the Prime function will do nothing.​

​