Please note that a readme file exists in the module zip file.
Release Notes
CTP-1301
Release Date: 08/21/2017
[FWVERSION-SCALER_V5.0 TX-STM32_V4.0 TX-VS_V2.31.0.3 TX-IN2_V2.3 TX-IN3_V2.3 RX-STM32_V4.0 RX-VS_V2.31.0.3 RX-IN2_V2.3]
----------------------------------------------------------
Table of Contents
----------------------------------------------------------
1. Prerequisites
2. Features added in this release
3. Fixes in this release:
4. Notable Points
5. Programming Information
----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------
- The SCALER FW for CTC-1402 should be v2.0 (or later)
- The EP FW for CTC-1402 should be v1.0 (or later)
- The ST MCU FW for CTC-1402 should be v1.0 (or later)
- The VS FW for CTC-1402 should be v7.0.0 (or later)
----------------------------------------------------------
2. Features added in this release:
----------------------------------------------------------
Features added in this release V5.0
2.1Add HDCP setting for HDMI output on WEB GUI, end-user can set the HDCP option as below:
Follow sink display;
HDCP1.4
HDCP 2.2
NO HDCP.
Note: When the source is encrypted, even if the end-user set the HDMI out as No HDCP, there is still not output on display;
2.2 Change Manufacturer ID to¡°1¡±(before is 504);
2.3 Change the pass-through (RS232-C) information as string format;
Fixes in this release. V5.0 08/21/2017
3.1 Optimize the experience when plug & pull HDMI out cable;
3.2 Add saving HDCP setting after power-cycle, and set as follow mode after reset;
3.3 Optimize the upload certificate feature;
----------------------------------------------------------
3. Fixes in this release
----------------------------------------------------------
3.1 Optimize the experience when plug & pull HDMI out cable;
3.2 Add saving HDCP setting after power-cycle, and set as follow mode after reset;
3.3 Optimize the upload certificate feature;
----------------------------------------------------------
4. Notable Points
----------------------------------------------------------
- There are some USB compatibility on some USB device
----------------------------------------------------------
5. Programming Information
----------------------------------------------------------
- Please upgrade the firmware (.kit) via ICSP, not any other specification notice.
